Trade Count:
(
0)
Posts: 3
Threads: 1
Thanks Received:
0 in 0 posts
Thanks Given: 0
Joined: 13 Dec 2014
Reputation:
0
Total Feedback: 0
Hi all I've been advised by Russel to post on here I have the 1.7 cdti 2011 and I've been getting a grinding /scraping noise coming from the front of the car sometimes it sounds like its coming from the wheel area or even the engine bay ... It don't happen when the car is idle only when driving and the sound increases when I accelerate ... I've recently changed the front break disks and pads but that didn't solve it ... The noise doesn't start immediately when driving useualy about 2-3 mins of driving ... Then once the car has "warmed" up as if to say the noise stops . Another way I could describe the sound is like someone pulling scraping a empty plastic bucket along the floor.
Hope you can help thanks
Trade Count:
(
2)
Posts: 6,426
Threads: 220
Thanks Received:
0 in 0 posts
Thanks Given: 0
Joined: 21 Feb 2014
Reputation:
14
Car: Insignia, 2.0 ecoflex Elite.
Location: wirral
Sex: Male
Total Feedback: 0
Welcome first thing to check would be the wheel arch liners and look for any evidence of rubbing from the wheel
other possibility's drive shaft of clutch so this really needs to be looked at i would go to your local garage and get an opinion
noises are hard to diagnose online
Trade Count:
(
0)
Posts: 3
Threads: 1
Thanks Received:
0 in 0 posts
Thanks Given: 0
Joined: 13 Dec 2014
Reputation:
0
Total Feedback: 0
hey thanks for the quick reply ... i checked the wheel arch liners and some had no plugs so i replaced them ... i couldnt find the correct size ones so i had to "make" them fit with some alterations ... if you had a link to the correct size ones that would be great ... and also yes i think its a garage job but id have to leave it there because it only dose it once the car has been idle for some time .
Trade Count:
(
2)
Posts: 6,426
Threads: 220
Thanks Received:
0 in 0 posts
Thanks Given: 0
Joined: 21 Feb 2014
Reputation:
14
Car: Insignia, 2.0 ecoflex Elite.
Location: wirral
Sex: Male
Total Feedback: 0
rusty will look the clips up for you as there a few different sizes
is your clutch stiff at all, but you 100% need to get that looked at any warranty left on the car
Trade Count:
(
0)
Posts: 3
Threads: 1
Thanks Received:
0 in 0 posts
Thanks Given: 0
Joined: 13 Dec 2014
Reputation:
0
Total Feedback: 0
unfortunatly not :( and ok thanks ... there is no stiffness of clutch what so ever it dont effect any of the driving what so ever just the noise which is quite loud its embarissing lol
Trade Count:
(
4)
Posts: 8,940
Threads: 359
Thanks Received:
4 in 4 posts
Thanks Given: 1
Joined: 31 Mar 2015
Reputation:
69
Car: Astra-J 2.0CDTI S/S 165ps
Location: Bournemouth, Dorset
Sex: Male
Total Feedback: 0
I'll look the clips up tomorrow.
It's a strange one the wife has a clicking noise on her car no one can track it down, I think I know what it is tho so when my mechanic is back I'll get him to check it out.
Sent from my iPhone using Tapatalk
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Trade Count:
(
4)
Posts: 8,940
Threads: 359
Thanks Received:
4 in 4 posts
Thanks Given: 1
Joined: 31 Mar 2015
Reputation:
69
Car: Astra-J 2.0CDTI S/S 165ps
Location: Bournemouth, Dorset
Sex: Male
Total Feedback: 0
I almost forgot about this.
11612035 RIVET, EXPANDING, COVER, PROTECTION
If you want to PM me your reg I'll confirm fitments as they do all different ones
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
![[Image: DSC03659_zpssmtodvyc.jpg]](http://s179.photobucket.com/user/tucpal/media/DSC03659_zpssmtodvyc.jpg.html)
![[Image: Rusty-2_zpsuzrvgsp6.GIF]](https://www.vxoc.org.uk/Images/rusty/post%20images/Rusty-2_zpsuzrvgsp6.GIF)
