Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tags
to where hardwire earth kit

Where to earth hardwire kit
#1
Hi

I have bought nextbase hardwire kit and manage to to slip the wire behind both wires and air bag in the A frame of passenger side. (Not strong enough to pull the A Pillar trim fully with that metal clip in place).

I have threaded the wire down the inner door by removing the rubber sill and was going to the side where the fuse box in the glove compartment.

My question ... should I attach the earth (black wire) to a metal bar behind the glove box on one of the nut bolt (not sure if it safe to do so) or attach it to the nut near the door after removing the trim near the bottom.

I need to free up my 12v Accessory Port in the central console so that I can charge my phone.

Any Advice would be appreciated

Thanks

Carrie-Anne
Reply
#2
Yes use the bar behind the glove box.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)