+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Members car's progress threads (https://vxoc.org.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Progress Thread: Sheppy1 (/showthread.php?tid=1275)
RE: Progress Thread: Sheppy1 - sheppy1 - 22:nd-Jan-2016
(22:nd-Jan-2016, 15:36:01)tucpal Wrote: Cool ?
Yeaaahhh now to wait a week for this wiring to turn up!!! Ha. Tried my local VX and they said they didn't have one and that they couldn't find any within the country!!!
@tucpal
for the rear door card led strips, do I just run the wire from the door card, through the rubber boot, down to the side plastic trim and along it then up to the front door rubber boot and in there? or is there an easier way?
ta
Progress Thread: Sheppy1 - sheppy1 - 23:rd-Jan-2016
My baby has had her first clean in months! [SMILING FACE WITH SMILING EYES]
![[Image: 04f431512b2ce0627401e4381bcbfdb5.jpg]](https://uploads.tapatalk-cdn.com/20160123/04f431512b2ce0627401e4381bcbfdb5.jpg)
![[Image: de3876029eba22e1061abe747ff50610.jpg]](https://uploads.tapatalk-cdn.com/20160123/de3876029eba22e1061abe747ff50610.jpg)
Sent from my XT1092 using Tapatalk
RE: Progress Thread: Sheppy1 - hejhopp123 - 23:rd-Jan-2016
Here we clean ourselfs before Yule... not after.
Nice car.
RE: Progress Thread: Sheppy1 - sheppy1 - 23:rd-Jan-2016
Haha makes sense! The grit all over the roads ruined it but I couldn't stand seeing it filthy any longer!! Cheers mate [SMILING FACE WITH SMILING EYES]
Sent from my XT1092 using Tapatalk
RE: Progress Thread: Sheppy1 - tucpal - 23:rd-Jan-2016
very nice mate and yes there is no easy way just take your time
RE: Progress Thread: Sheppy1 - sheppy1 - 23:rd-Jan-2016
Thanks @tucpal
I have just bought an official centre console with arm rest too to replace my standard one which has a 3rd party arm rest
RE: Progress Thread: Sheppy1 - Jj0063 - 24:th-Jan-2016
Did your car not even have an arm rest as standard?! Blimey
RE: Progress Thread: Sheppy1 - sheppy1 - 24:th-Jan-2016
Nope! [PENSIVE FACE]
Sent from my XT1092 using Tapatalk
RE: Progress Thread: Sheppy1 - Rusty2009 - 24:th-Jan-2016
(23:rd-Jan-2016, 21:13:06)sheppy1 Wrote: Thanks @tucpalbelieve it or not I was really peed off with my car a year back and with how much stuff it didn't have, almost swapped it...but now after all my mods etc. I bloody love it!!! Ha.
I have just bought an official centre console with arm rest too to replace my standard one which has a 3rd party arm rest
Now you just gotta learn to drive it in snow
On a more important note thou glad your loving your J..
Progress Thread: Sheppy1 - Tonto - 24:th-Jan-2016
(24:th-Jan-2016, 10:04:03)Rusty2009 Wrote:(23:rd-Jan-2016, 21:13:06)sheppy1 Wrote: Thanks @tucpalbelieve it or not I was really peed off with my car a year back and with how much stuff it didn't have, almost swapped it...but now after all my mods etc. I bloody love it!!! Ha.
I have just bought an official centre console with arm rest too to replace my standard one which has a 3rd party arm rest
Now you just gotta learn to drive it in snow
On a more important note thou glad your loving your J..
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 24:th-Jan-2016
(24:th-Jan-2016, 10:04:03)Rusty2009 Wrote:Not important, I can drive it in the rain and that's all that matters in the UK haha.(23:rd-Jan-2016, 21:13:06)sheppy1 Wrote: Thanks @tucpalbelieve it or not I was really peed off with my car a year back and with how much stuff it didn't have, almost swapped it...but now after all my mods etc. I bloody love it!!! Ha.
I have just bought an official centre console with arm rest too to replace my standard one which has a 3rd party arm rest
Now you just gotta learn to drive it in snow
On a more important note thou glad your loving your J..
Thanks for all your help anyway mate with everything! She's almost perfect now [SMILING FACE WITH SMILING EYES] [SMILING FACE WITH SMILING EYES]
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - AlexFitton - 24:th-Jan-2016
(24:th-Jan-2016, 10:19:21)sheppy1 Wrote:(24:th-Jan-2016, 10:04:03)Rusty2009 Wrote:Not important, I can drive it in the rain and that's all that matters in the UK haha.(23:rd-Jan-2016, 21:13:06)sheppy1 Wrote: Thanks @tucpalbelieve it or not I was really peed off with my car a year back and with how much stuff it didn't have, almost swapped it...but now after all my mods etc. I bloody love it!!! Ha.
I have just bought an official centre console with arm rest too to replace my standard one which has a 3rd party arm rest
Now you just gotta learn to drive it in snow
On a more important note thou glad your loving your J..
Thanks for all your help anyway mate with everything! She's almost perfect now
Sent from my XT1092 using Tapatalk
It appears there will always be something you want to do. It wont be long before you start to turn her info a K.
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 24:th-Jan-2016
My long term mod which I'll try and pick parts up for over the next year or so (have too much stuff I need to pay for this year hence it being a long term mod) is rear electric windows [SMILING FACE WITH SMILING EYES]
Sent from my XT1092 using Tapatalk
(24:th-Jan-2016, 10:29:05)AlexFitton Wrote:See my latest post... Hahaha. Also have my thinking there... Think the bumper from a K would fit my J?? [WINKING FACE] haha(24:th-Jan-2016, 10:19:21)sheppy1 Wrote:(24:th-Jan-2016, 10:04:03)Rusty2009 Wrote:Not important, I can drive it in the rain and that's all that matters in the UK haha.(23:rd-Jan-2016, 21:13:06)sheppy1 Wrote: Thanks @tucpalbelieve it or not I was really peed off with my car a year back and with how much stuff it didn't have, almost swapped it...but now after all my mods etc. I bloody love it!!! Ha.
I have just bought an official centre console with arm rest too to replace my standard one which has a 3rd party arm rest
Now you just gotta learn to drive it in snow
On a more important note thou glad your loving your J..
Thanks for all your help anyway mate with everything! She's almost perfect now
Sent from my XT1092 using Tapatalk
It appears there will always be something you want to do. It wont be long before you start to turn her info a K.
Sent from my iPhone using Tapatalk
Sent from my XT1092 using Tapatalk
RE: Progress Thread: Sheppy1 - tucpal - 24:th-Jan-2016
no it won't ha ha
RE: Progress Thread: Sheppy1 - sheppy1 - 25:th-Jan-2016
So I've just bought my very first air filter! Go me! Ha. Went for the K&N one in the end and got it at a good price! Fingers crossed it doesn't cause MAF issues which some people report..
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - Rusty2009 - 25:th-Jan-2016
I have no issues with my K&N
Sent from my iPhone using Tapatalk
Progress Thread: Sheppy1 - Tonto - 25:th-Jan-2016
No issues with my k&n mate
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 25:th-Jan-2016
Great news then! [SMILING FACE WITH SMILING EYES] got it new off Amazon for 35 quid too which is great I think!
Sent from my XT1092 using Tapatalk
RE: Progress Thread: Sheppy1 - Rusty2009 - 25:th-Jan-2016
Good price I had to pay £54 also got the oil kit for £15 at the same time.
Progress Thread: Sheppy1 - Tonto - 25:th-Jan-2016
I paid £44 I think, I didn't get the oil kit though
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 25:th-Jan-2016
Is it supposed to come with the oil kit or is that just for when the oil needs refreshing/changing on it?
RE: Progress Thread: Sheppy1 - Rusty2009 - 25:th-Jan-2016
No doesn't come with it that's for when it needs cleaning and re-oiling, I got it at the same time so I have it here ready.
RE: Progress Thread: Sheppy1 - sheppy1 - 25:th-Jan-2016
ahhhh brill, just checked amazon and it would have been £49 for the filter and the oil...I'll get the oil closer to the time I need it
I'll stick the sticker on the filter box too about it not needing to be replaced etc. as i don't want VX whizzing it! Ha.
So is it just disconnect the air pipe, then undo the screws around the actual black cover to get to the filter or is there something more?
Progress Thread: Sheppy1 - Tonto - 25:th-Jan-2016
I only undone the screws, popped old out and new in and screwed back down
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 25:th-Jan-2016
Oh right! So didn't even need to take the pipe off?
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - Tonto - 25:th-Jan-2016
Nope never touched it mate
Sent from my iPhone using Tapatalk
Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
@tucpal as I know he did it on his Astra but anyone else can chip in if they like!
Is there a method for getting this plug/grommet out of the door frame?
![[Image: cb2efc91a5bf3d5cd94257e543a0614d.jpg]](https://uploads.tapatalk-cdn.com/20160126/cb2efc91a5bf3d5cd94257e543a0614d.jpg)
Tried everything and it doesn't wanna budge and just feels like it will snap! Trying to wire rear leds from rear door cards to the front of the car
Sent from my XT1092 using Tapatalk
RE: Progress Thread: Sheppy1 - bhalay207 - 26:th-Jan-2016
It looks like it will push into the car judging by the way the tab on the top is positioned
Sent from my LG G4 using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
Yeah that's what I thought! But if that was the case then how would I get it out again?
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - Rusty2009 - 26:th-Jan-2016
Push down the clip on the top think there is one at bottom and it pushes into the door
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
Oh right!! Okay, I'll give that a go then! [SMILING FACE WITH SMILING EYES] so it pulls back out then easy enough does it?
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - Rusty2009 - 26:th-Jan-2016
Yep
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
Result! Can do my dear door card LEDs when I get a min [SMILING FACE WITH SMILING EYES] cheers
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
You were right about it pushing in [SMILING FACE WITH SMILING EYES] also my centre console arrived! All looks mint except the scrappies managed to break a bracket of some sort under the cup holder section inside... Not sure what it was for! Rusty said it will be fine so yeah, looks like I'm onto a winner here [SMILING FACE WITH SMILING EYES]
![[Image: 70ea9f8fe9219975a602ef34c2fadab2.jpg]](https://uploads.tapatalk-cdn.com/20160126/70ea9f8fe9219975a602ef34c2fadab2.jpg)
![[Image: e653c967d35cd76d3e5a7ff39655eff1.jpg]](https://uploads.tapatalk-cdn.com/20160126/e653c967d35cd76d3e5a7ff39655eff1.jpg)
Broken bracket
![[Image: f8d0ddde6ec117f8506a4e1b5312afe0.jpg]](https://uploads.tapatalk-cdn.com/20160126/f8d0ddde6ec117f8506a4e1b5312afe0.jpg)
Sent from my XT1092 using Tapatalk
RE: Progress Thread: Sheppy1 - tucpal - 26:th-Jan-2016
scrappy's you gotta love them haha
nice mate you will have any missing clips etc on your other one
now go and fit it
RE: Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
What you mean mate about the missing clips? And gonna have to do it at the weekend I think...
Sent from my XT1092 using Tapatalk
Oh yeah I get what you mean! Don't think there are any clips tbh... Just screws isn't it and the two front clips which hold it to the centre console
Sent from my XT1092 using Tapatalk
RE: Progress Thread: Sheppy1 - hejhopp123 - 26:th-Jan-2016
Thats alot of cup holders. Party time.
No drinking & drive.
Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
Really annoyed, long story, broke things in the old one and scratched my hands to shiz... Here's the new one in the car..
![[Image: 8c9f3dca7c4aa60f47eeaef3c86dc3fd.jpg]](https://uploads.tapatalk-cdn.com/20160126/8c9f3dca7c4aa60f47eeaef3c86dc3fd.jpg)
![[Image: d1dacf4e958f7d60ebe0292088628bb2.jpg]](https://uploads.tapatalk-cdn.com/20160126/d1dacf4e958f7d60ebe0292088628bb2.jpg)
Need new gator and handbrake handle
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - Tonto - 26:th-Jan-2016
Well done mate, what you broken? Also is there meant to be a gap between handbrake gaitor and trim?
Sent from my iPhone using Tapatalk
Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
I snapped all the original one getting it off which wasn't an issue, I also wrecked the underside of the handbrake handle! Unsure if it can be changed without changing the whole hand brake [PENSIVE FACE] thanks though
![[Image: 55b60a7ad20998d3299c7fa20e1a5f6f.jpg]](https://uploads.tapatalk-cdn.com/20160126/55b60a7ad20998d3299c7fa20e1a5f6f.jpg)
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - Tonto - 26:th-Jan-2016
Ah nightmare mate, hopefully it'll not be as noticeable if you clean it!
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
Well it's on the underside which is good but it's annoying me [PENSIVE FACE]. My hands are a mess, I literally snapped the other one in two I was getting so annoyed that I couldn't get it off!
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - Tonto - 26:th-Jan-2016
Haha I'm laughing but I would be the same, how one you changed it all over? Yeah at least it's not visible!
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
What you mean mate? And I felt like crying...I was ***** so annoyed!
Progress Thread: Sheppy1 - Tonto - 26:th-Jan-2016
I said haha but I would have been shouting and swearing at it too.
Why did you change the centre over? You could have just swapped leather armrest yeah?
You sound like me when I tried soldering earlier...
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
Hahaha why how did that go? And because I never had a console with an arm rest... The arm rest I had was a screw in third party one... So I got the centre console which is about as hard to find as Rocking horse ***** and then had to swap the whole lot over...
Sent from my XT1092 using Tapatalk
Progress Thread: Sheppy1 - Tonto - 26:th-Jan-2016
Ah right I see, I thought you had armrest and swapped sit for a leather one! Haha what a chow on mate!
Yeah I got led desoldered but could I hell get new one to stay on... @Jonathaneuk is helping me tomorrow morning lol.
Sent from my iPhone using Tapatalk
Progress Thread: Sheppy1 - Rusty2009 - 26:th-Jan-2016
(26:th-Jan-2016, 22:51:39)Tonto Wrote: Ah right I see, I thought you had armrest and swapped sit for a leather one! Haha what a chow on mate!
Yeah I got led desoldered but could I hell get new one to stay on... @Jonathaneuk is helping me tomorrow morning lol.
Sent from my iPhone using Tapatalk
I said hot air was better than soldering iron.
Nice one looks much better, the handle just pulls off.
Sent from my iPhone using Tapatalk
Progress Thread: Sheppy1 - Jonathaneuk - 26:th-Jan-2016
We will sort it tomorrow @tonto
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 26:th-Jan-2016
Thanks @rusty2009 [SMILING FACE WITH SMILING EYES] bet I end up cracking my wind screen or something taking the handbrake rubber off haha
Sent from my XT1092 using Tapatalk