+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Members car's progress threads (https://vxoc.org.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Progress Thread: Sheppy1 (/showthread.php?tid=1275)
RE: Progress Thread: Sheppy1 - sheppy1 - 23:rd-Oct-2016
I'm fast running out of crap to buy for the car guys! haha
Progress Thread: Sheppy1 - sheppy1 - 24:th-Oct-2016
![[Image: 5f1967f5d7b04b97afb8d67298d5314f.jpg]](http://uploads.tapatalk-cdn.com/20161024/5f1967f5d7b04b97afb8d67298d5314f.jpg)
![[Image: 29351c91b3f1f4d9500c3afde80c8c71.jpg]](http://uploads.tapatalk-cdn.com/20161024/29351c91b3f1f4d9500c3afde80c8c71.jpg)
Look what arrived today guys! [SMILING FACE WITH SMILING EYES]
Sent from my Nexus 6P using Tapatalk
Progress Thread: Sheppy1 - Tonto - 24:th-Oct-2016
Ooh, very nice mate. When are you fitting this then?
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 24:th-Oct-2016
Indeed! And not sure dude! Plan was to fit the module first and wire it up etc. But the provided cables won't be long enough so need to wait for extra wiring to come from eBay or Russell before I can do that! I wanted to have that done first so that I could test the system out before leaving National Tyres who I'm gonna get to install the valves...May be another week at this rate :(
Progress Thread: Sheppy1 - Tonto - 24:th-Oct-2016
Ah fair enough, look forward to seeing how you get on with it anyway mate!
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 24:th-Oct-2016
Will report back when there's progress! Have ordered the extra long AV cable anyway.
Sent from my Nexus 6P using Tapatalk
Progress Thread: Sheppy1 - sheppy1 - 28:th-Oct-2016
Small update guys! Started on the wiring today for the tpms after Russell worked out the wiring diagram for me that I needed to follow to get everything functioning.
Essentially the TPMS control unit takes over the job of relaying the reverse camera signal to the head unit so it will now become a wired reverse camera rather than a wireless one once I've completed the TPMS install.
I've edited the power and RCA cable to the front of the car from the rear cubby hole where the TPMS unit lives and tucked the wiring behind the glove box until my final part arrives so I can connect all the wiring up and then take the car to have the TPMS valves installed [SMILING FACE WITH SMILING EYES]
![[Image: 1dd0fccf014370c3e4b22d2ea88147a5.jpg]](http://uploads.tapatalk-cdn.com/20161028/1dd0fccf014370c3e4b22d2ea88147a5.jpg)
![[Image: 4ef5e921089e8a62271e12ac0aaa0372.jpg]](http://uploads.tapatalk-cdn.com/20161028/4ef5e921089e8a62271e12ac0aaa0372.jpg)
![[Image: c2d21f6dae7004c5a5a08d5a91c2c1a6.jpg]](http://uploads.tapatalk-cdn.com/20161028/c2d21f6dae7004c5a5a08d5a91c2c1a6.jpg)
![[Image: 6b16173ffdce1dabfd439f640f816344.jpg]](http://uploads.tapatalk-cdn.com/20161028/6b16173ffdce1dabfd439f640f816344.jpg)
![[Image: e1d20456461429eabc49a829cf669d1d.jpg]](http://uploads.tapatalk-cdn.com/20161028/e1d20456461429eabc49a829cf669d1d.jpg)
![[Image: b20298f776af158d4ccb59d82c1973ab.jpg]](http://uploads.tapatalk-cdn.com/20161028/b20298f776af158d4ccb59d82c1973ab.jpg)
Sent from my Nexus 6P using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 2:nd-Nov-2016
Okay all wired up and i think it's working. The reverse camera works anyway which is now wired and activated via the tpms module.
Need to find time to have the sensor valves installed now
Sent from my Nexus 6P using Tapatalk
Progress Thread: Sheppy1 - sheppy1 - 3:rd-Nov-2016
This is the wiring diagram @rusty2009 did for me which I followed if anyone is interested
![[Image: e446edd5ed5a10d03647aff42c5fff4f.jpg]](http://uploads.tapatalk-cdn.com/20161103/e446edd5ed5a10d03647aff42c5fff4f.jpg)
Sent from my Nexus 6P using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 11:th-Nov-2016
Bought a set of these DRLs:
http://www.hids-direct.co.uk/r580-w21-5w-canbus-30-smd-3014-led-bulbs-pair-white/
And these reg plate bulbs:
http://www.hids-direct.co.uk/philips-501-w5w-whitevision-car-sidelight-bulbs-twin-pack/
RE: Progress Thread: Sheppy1 - stigeye - 11:th-Nov-2016
I am interested to see how you get on with those as I was considering a set, but thought I would wait for someone else to be the guinea pig first lol
RE: Progress Thread: Sheppy1 - sheppy1 - 11:th-Nov-2016
Ha yeah I saw a few people were on the fence about them...But yeah will do!
RE: Progress Thread: Sheppy1 - marcus01 - 14:th-Nov-2016
Yeah I'd be keen to know how you get on with those led bulbs. I won't be trying any of those Halfords pure white bulbs in a hurry again.
Sent from my SM-G930F using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 14:th-Nov-2016
(14:th-Nov-2016, 12:08:45)marcus01 Wrote: Yeah I'd be keen to know how you get on with those led bulbs. I won't be trying any of those Halfords pure white bulbs in a hurry again.
Sent from my SM-G930F using Tapatalk
I think the Halford ones are fine...just wanted brighter ones so hoping LED ones are brighter
Progress Thread: Sheppy1 - Tonto - 14:th-Nov-2016
Just a little update for the leds from hids direct. @Jonathaneuk had them and he said initially he got an error pop up but they've been fine ever since and they're bright!
Here's a picture!
![[Image: cb17f5282e4b36a1f8ed8424aeebf847.png]](http://uploads.tapatalk-cdn.com/20161114/cb17f5282e4b36a1f8ed8424aeebf847.png)
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 14:th-Nov-2016
Look great those mate! what about day time though? Mine look bright at night but not during the day
Progress Thread: Sheppy1 - Tonto - 14:th-Nov-2016
I seen them in person on Saturday and they're very bright mate. Look awesome up close! I've already ordered some myself too.
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - srea064 - 15:th-Nov-2016
Do they dim down though when the sidelights come on?
A lot of the LEDs I've tried stay super bright at 21w and don't dim down even though the description states that they do.
RE: Progress Thread: Sheppy1 - sheppy1 - 17:th-Nov-2016
Good question! I hope they do...apparently you can fail an MOT if they don't!
@Rusty2009 has done my LED conversion too!
very happy with the results!!![[Image: iegqg9H.jpg]](http://i.imgur.com/iegqg9H.jpg)
![[Image: NHSDcWn.jpg]](http://i.imgur.com/NHSDcWn.jpg)
![[Image: LUogmPS.jpg]](http://i.imgur.com/LUogmPS.jpg)
![[Image: bI24Vxz.jpg]](http://i.imgur.com/bI24Vxz.jpg)
![[Image: q7uHSOK.jpg]](http://i.imgur.com/q7uHSOK.jpg)
![[Image: QlO4Dcz.jpg]](http://i.imgur.com/QlO4Dcz.jpg)
![[Image: KcqIi33.jpg]](http://i.imgur.com/KcqIi33.jpg)
Progress Thread: Sheppy1 - Jonathaneuk - 17:th-Nov-2016
Yep they do dim down
Sent from my iPhone using Tapatalk
Progress Thread: Sheppy1 - sheppy1 - 19:th-Nov-2016
Installed the LED DRLs from HIDs direct... And they're good! Very bright even in daytime compared to my halfords halogens.
![[Image: 4919e9a21df48c0f4557cd2d58fc9552.jpg]](http://uploads.tapatalk-cdn.com/20161119/4919e9a21df48c0f4557cd2d58fc9552.jpg)
New DRLs
![[Image: e6208dc19f6c5ced3500bdbea361e047.jpg]](http://uploads.tapatalk-cdn.com/20161119/e6208dc19f6c5ced3500bdbea361e047.jpg)
Old DRLs
![[Image: 8b270c0d779617c542eacf537a7ed479.jpg]](http://uploads.tapatalk-cdn.com/20161119/8b270c0d779617c542eacf537a7ed479.jpg)
Sent from my Nexus 6P using Tapatalk
RE: Progress Thread: Sheppy1 - Doughy - 20:th-Nov-2016
(19:th-Nov-2016, 13:37:42)sheppy1 Wrote: Installed the LED DRLs from HIDs direct... And they're good! Very bright even in daytime compared to my halfords halogens.
New DRLs
Old DRLs
Sent from my Nexus 6P using Tapatalk
ordered mine last night so should have these on Tuesday
RE: Progress Thread: Sheppy1 - sheppy1 - 20:th-Nov-2016
They're so bright! Even in day time... You're gonna love them
Sent from my Nexus 6P using Tapatalk
RE: Progress Thread: Sheppy1 - Doughy - 22:nd-Nov-2016
(20:th-Nov-2016, 17:15:25)sheppy1 Wrote: They're so bright! Even in day time... You're gonna love themgot them dont love them its telling me to check the left and right drl. time to take them out. £20 wasted
Sent from my Nexus 6P using Tapatalk
RE: Progress Thread: Sheppy1 - sheppy1 - 22:nd-Nov-2016
(22:nd-Nov-2016, 10:38:11)Doughy Wrote:Aha! Most do say they cause errors.. They didn't with mine but each person's mileage varies!(20:th-Nov-2016, 17:15:25)sheppy1 Wrote: They're so bright! Even in day time... You're gonna love themgot them dont love them its telling me to check the left and right drl. time to take them out. £20 wasted
Sent from my Nexus 6P using Tapatalk
Sent from my Nexus 6P using Tapatalk
RE: Progress Thread: Sheppy1 - stigeye - 22:nd-Nov-2016
(22:nd-Nov-2016, 10:38:11)Doughy Wrote:(20:th-Nov-2016, 17:15:25)sheppy1 Wrote: They're so bright! Even in day time... You're gonna love themgot them dont love them its telling me to check the left and right drl. time to take them out. £20 wasted
Sent from my Nexus 6P using Tapatalk
In for a penny in for a pound, you may as well get some resistors for them now you have the bulbs.
RE: Progress Thread: Sheppy1 - Doughy - 22:nd-Nov-2016
Yeah got some coming. Will it hurt to have the cap off the back off lamp? With the resistor harness I don't think I'll get the caps on
RE: Progress Thread: Sheppy1 - stigeye - 23:rd-Nov-2016
(22:nd-Nov-2016, 18:55:28)Doughy Wrote: Yeah got some coming. Will it hurt to have the cap off the back off lamp? With the resistor harness I don't think I'll get the caps on
If you don't mind cutting the wires you could just drill a hole in the cap and thread the wires through and then reattach the wires...
![[Image: 248080ea252b9ea8306939de188f0bfa.png]](https://gyazo.com/248080ea252b9ea8306939de188f0bfa.png)
![[Image: b84f7366392217a2a1c148aef98442fc.png]](https://gyazo.com/b84f7366392217a2a1c148aef98442fc.png)
Further info here... https://www.vxoc.org.uk/forum/Thread-HOW-TO-LED-DRL-Error-free-for-the-Astra-J-5-door
RE: Progress Thread: Sheppy1 - Doughy - 23:rd-Nov-2016
looks like i best get the soldering iron out, thanks for the info
RE: Progress Thread: Sheppy1 - stigeye - 23:rd-Nov-2016
In theory you could drill a hole on the middle, same as picture above, and then saw from the outside edge into the centre. That way you could prize it open and slide the wires through the cut and into the centre whole without the need of cutting the wires... if that makes sense
Progress Thread: Sheppy1 - Tonto - 23:rd-Nov-2016
(23:rd-Nov-2016, 13:29:10)stigeye Wrote: In theory you could drill a hole on the middle, same as picture above, and then saw from the outside edge into the centre. That way you could prize it open and slide the wires through the cut and into the centre whole without the need of cutting the wires... if that makes sense
More chance of water getting in the though mate. It's a pain either imo
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - Doughy - 23:rd-Nov-2016
(23:rd-Nov-2016, 13:29:10)stigeye Wrote: In theory you could drill a hole on the middle, same as picture above, and then saw from the outside edge into the centre. That way you could prize it open and slide the wires through the cut and into the centre whole without the need of cutting the wires... if that makes senseI think I'll solder it. Don't want water in there. Will put some silicone over the hole after
Sent from my SM-G935F using Tapatalk
RE: Progress Thread: Sheppy1 - Doughy - 24:th-Nov-2016
Sending them back. Even with resistors they didn't even light up. Just as well
I tested before I cut or drilled anything.
Sent from my SM-G935F using Tapatalk
RE: Progress Thread: Sheppy1 - Rymaan82 - 24:th-Nov-2016
(24:th-Nov-2016, 14:10:13)Doughy Wrote: Sending them back. Even with resistors they didn't even light up. Just as well
I tested before I cut or drilled anything.
Sent from my SM-G935F using Tapatalk
Hi Doughy,
See you have an Astra J Elite, what year is it? May of saved me the job of trying myself. Is it the pre facelift model?
Thanks
RE: Progress Thread: Sheppy1 - Doughy - 24:th-Nov-2016
(24:th-Nov-2016, 15:20:33)Rymaan82 Wrote:It's a 13 plate mate(24:th-Nov-2016, 14:10:13)Doughy Wrote: Sending them back. Even with resistors they didn't even light up. Just as well
I tested before I cut or drilled anything.
Sent from my SM-G935F using Tapatalk
Hi Doughy,
See you have an Astra J Elite, what year is it? May of saved me the job of trying myself. Is it the pre facelift model?
Thanks
Sent from my SM-G935F using Tapatalk
RE: Progress Thread: Sheppy1 - Rymaan82 - 24:th-Nov-2016
(24:th-Nov-2016, 15:21:55)Doughy Wrote:(24:th-Nov-2016, 15:20:33)Rymaan82 Wrote:It's a 13 plate mate(24:th-Nov-2016, 14:10:13)Doughy Wrote: Sending them back. Even with resistors they didn't even light up. Just as well
I tested before I cut or drilled anything.
Sent from my SM-G935F using Tapatalk
Hi Doughy,
See you have an Astra J Elite, what year is it? May of saved me the job of trying myself. Is it the pre facelift model?
Thanks
Sent from my SM-G935F using Tapatalk
Ah right mines 2011 so most likely will act the same way yours has. Cheers for the info.
@tonto you had any issues with yours? Managed to fit any?
Progress Thread: Sheppy1 - Tonto - 24:th-Nov-2016
@Rymaan82 hey, yeah I have them fitted however I do get errors.
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - stigeye - 24:th-Nov-2016
I think that 90% of those that have purchased them so far are getting errors, which to me would be false advertising, in order to call them error free the majority of those sold should be error free, not the minority.
RE: Progress Thread: Sheppy1 - Doughy - 24:th-Nov-2016
(24:th-Nov-2016, 16:31:34)stigeye Wrote: I think that 90% of those that have purchased them so far are getting errors, which to me would be false advertising, in order to call them error free the majority of those sold should be error free, not the minority.Exactly. He told me over the phone they are not 100% error free and are not guaranteed to not throw up errors. So if that is the case how can they be canbus leds?
Sent from my SM-G935F using Tapatalk
RE: Progress Thread: Sheppy1 - tucpal - 24:th-Nov-2016
You need load resisters to be error free there is no such thing as a canbus free led unless it is not monitored by the canbus
Progress Thread: Sheppy1 - Jonathaneuk - 24:th-Nov-2016
![[Image: d18a6f5dc4299e5f3ce8854401692b9d.jpg]](http://uploads.tapatalk-cdn.com/20161124/d18a6f5dc4299e5f3ce8854401692b9d.jpg)
I originally didn't have the error was fine !
But now the error is permanently coming on!
Annoying but I don't mind cause I love them !
I'll get used to the error
Sent from my iPhone using Tapatalk
Progress Thread: Sheppy1 - Tonto - 24:th-Nov-2016
@tucpal would the resistors linked in the other led drl work exactly the same then?
Sent from my iPhone using Tapatalk
RE: Progress Thread: Sheppy1 - tucpal - 24:th-Nov-2016
YEP
Progress Thread: Sheppy1 - sheppy1 - 6:th-Jan-2017
Hoping it does look rubbish in person but I'm getting my screen on the speedo changed from red to black and white on Sunday
so will be like this ![[Image: a5f098a925f6d8c6c8c00973ddbcb0b2.jpg]](http://uploads.tapatalk-cdn.com/20170106/a5f098a925f6d8c6c8c00973ddbcb0b2.jpg)
Sent from my STV100-4 using Tapatalk
Progress Thread: Sheppy1 - sheppy1 - 8:th-Jan-2017
Okay screen conversion done! [SMILING FACE WITH SMILING EYES]
Happy with how it looks too! Doesn't look like it does in the Golf's (solid black background and white text) but it does look good I think!
The whole panel itself lights up and then you get the illuminated white digits so you sort of end up to white digits and dark grey background due to it lighting up.
![[Image: fbef34e2e08c513abff0f18b97a7a5b5.jpg]](http://uploads.tapatalk-cdn.com/20170108/fbef34e2e08c513abff0f18b97a7a5b5.jpg)
![[Image: cada78d4f450aaf42e392769f5237afe.jpg]](http://uploads.tapatalk-cdn.com/20170108/cada78d4f450aaf42e392769f5237afe.jpg)
Sent from my STV100-4 using Tapatalk
RE: Progress Thread: Sheppy1 - Doraemon02 - 8:th-Jan-2017
And what about in daylight? Can you see it in good conditions?
RE: Progress Thread: Sheppy1 - sheppy1 - 8:th-Jan-2017
(8:th-Jan-2017, 18:57:51)Doraemon02 Wrote: And what about in daylight? Can you see it in good conditions?Sure can! Looked very readable indeed before it went dark. Probably more so than the red one as the white contrasts with the black rather than having two shades of red like with the stock leds
Sent from my STV100-4 using Tapatalk
RE: Progress Thread: Sheppy1 - Doraemon02 - 8:th-Jan-2017
Well that's awesome then!
I would like to turn all the interior lights white on mine also, but I don't understand a thing about that stuff and would only mess all things up eheh
Congrats on your's Sheppy!
RE: Progress Thread: Sheppy1 - sheppy1 - 8:th-Jan-2017
Thank you! [SMILING FACE WITH SMILING EYES] and go be honest I couldn't have done it myself either! Russell did my button conversions from red to purple and a chap from Bradford did my speedo screen! Where are you based? Russell can do most stuff via the post and the chap from Bradford you'd have to go and visit
Sent from my STV100-4 using Tapatalk
RE: Progress Thread: Sheppy1 - Doraemon02 - 9:th-Jan-2017
Not for me mate, I'm from Portugal! Ahah
But thanks for trying to help!