How Remove Flex Ride

[Sergio Pinto]

Hi,
Sorry for my English, I'm from Portugal.
I have an Astra J 2011 1.6 turbo, I would like to remove the shock absorbers and the system (Flex ride) without giving errors.
They can help.

Regards
Sérgio

[Rusty2009]

This would require BCM programming, which would involve asking GM for a VCI code.

Given they won't supply a VCI code to retrofit it I can't see them giving a code to remove it.

[Sergio Pinto]

[quote pid='53896' dateline='1607156950']
This would require BCM programming, which would involve asking GM for a VCI code.

Given they won't supply a VCI code to retrofit it I can't see them giving a code to remove it.
[/quote]

Thanks,
I have MDI and GDS2 for programming.
Would you like to know where the system cables go and where is the Flex ride module located?

[Rusty2009]

GDS2 is not for programming GDS2 is diagnostic's.

You should really email TIS and ask if they will supply a VCI code to remove F45 flexride from your VIN.

All programming is to done on the BCM & IPC.

In terms of the flexride module it's located behind the rear fuse board LH side behind boot trim.

[Sergio Pinto]

GDS2 is not for programming GDS2 is diagnostic's.

You should really email TIS and ask if they will supply a VCI code to remove F45 flexride from your VIN.

All programming is to done on the BCM & IPC.

In terms of the flexride module it's located behind the rear fuse board LH side behind boot trim.

Thanks.
Ok, today I'm going try program the module.