Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tags
amp sub

sub amp
#1
im thinking of fitting a sub/amp, the main power wire needs to connect to the battery (+)
can any one tell me if there is any where in side the car I can connect to.
Reply
#2
Power from battery and ground can connect to a ground point in the rear.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#3
(29:th-Oct-2018, 17:26:20)Rusty2009 Wrote: Power from battery and ground can connect to a ground point in the rear.

cheers for your reply, but is there a way through the bulkhead.
Reply
#4
Yes come though where all the other wires go through.
Put the fuse for the amp as close to the battery as possible.

When I fitted mine I had to cut the bolt and replace it, new bolt and nut can be brought from halfords.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)