insignia fog lights preparation

[zzattack]

I'm preparing to install front fogs in my insignia. I think I've got most of the info ready but still have a few questions. I like to know the procedure from start to finish so there's no surprises.

When all is said and done I'd like to write up a how-to for it.


Parts:
- The lamps, obviously. OEM nr. 13226828 and 13226829.


- H10 bulbs 2x. Already fitted in above image. Should be easily available, though the bulb isn't common so might take a day before they stock.

- The grill covers, both sides. OEM nr. 1400463, 1400464.


- H10 connector and wire 2x.


- Crimp pins for fusebox. Found by rusty2009, seemingly only available at mouser. Couldn't find them on any of the competitors' websites.
Will add pic when they arrive.

- Light switch which includes a button for the front fog lights. OEM nr. 13268702. Might need a different one for right-hand drive vehicles!


- Electrical wire. Simple speaker wire should suffice.
- Faston round terminals for the ground connection of the fogs. Attach somewhere to chassis.
- Unsure: might need some screws or fitting materials.

Electrical:
Schematic, courtesy of rusty2009. 

From my understanding, we can tap into the 48 fuse in the box under the bonnet. The KR46 relay will power the fog lights when the K9 body control module indicates they should be turned on.


If I'm not mistaken (please correct me if I am!!), this means we can route a wire from the 48 fuse to the lamps.


Lifting up the fusebox reveals the block where we can hopefully add the wire that'll run to the fogs. I will have to do some measuring to find out precisely where we can insert the wires. Will update once I know more.






Fitting:
Will have a look how to tackle this. When I know more I'll add it here.