![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
5:th-Mar-2015, 09:57:59
I would say the white plug forget about.
So you would need to ground both ends Tucpal has given you the details for that.
As for power to the screen there a few ways you could do this,
1. A switched live relay off the battery with an in-line fuse.
2. In-line fuse and run of the back of the 12v socket.
As to the wire for the reverse light here is the pin out from the back of the light, which will give the wire colour.
![[Image: E43R%20Liftgate%20Tail%20Lamp%20Assembly...0Right.jpg]](https://www.vxoc.org.uk/Images/vxoc%20astra-j-gtc/E43R%20Liftgate%20Tail%20Lamp%20Assembly%20-%20Right.jpg)
As to modifying what you have will the camera fit on the black plastic so you can get it fixed? you would need to drill a hole to get the wires through.
So you would need to ground both ends Tucpal has given you the details for that.
As for power to the screen there a few ways you could do this,
1. A switched live relay off the battery with an in-line fuse.
2. In-line fuse and run of the back of the 12v socket.
As to the wire for the reverse light here is the pin out from the back of the light, which will give the wire colour.
As to modifying what you have will the camera fit on the black plastic so you can get it fixed? you would need to drill a hole to get the wires through.
![[Image: Rusty-2_zpsuzrvgsp6.GIF]](https://www.vxoc.org.uk/Images/rusty/post%20images/Rusty-2_zpsuzrvgsp6.GIF)
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.