![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
20:th-Apr-2018, 12:09:23
i've found that the fronts are all present and wired up, but the rears have been removed... and the holes drilled to between 20 and 21mm to shove cheap aftermarket sensors through (think they should be 17mm holes)... and the bumper is a PDC bumper with the catches on the back for the stock sensors!! only they wont sit right now grrrr.
i have bought the parts i need... only got the PDC module so far, but i installed it, set park pilot to present in the IPC and it works (is there anywhere else PDC should be set on these cars?
it works, i have the new option to turn PDC on or off in the radio's vehicle settings...
Well, when i say it works, the front ones work... as soon as i select reverse it shuts down and sets 4 DTC's for the missing sensors (they are still in the post)
As i had to set the PDC to present in the IPC, i thought i'd get the display of them, but i dont, maybe this IPC only does rear display of them?? or the IPC being a 2010 version dosent do much at all, it is very basic compared to the 2014 version i had before (but destroyed)
i have bought the parts i need... only got the PDC module so far, but i installed it, set park pilot to present in the IPC and it works (is there anywhere else PDC should be set on these cars?
it works, i have the new option to turn PDC on or off in the radio's vehicle settings...
Well, when i say it works, the front ones work... as soon as i select reverse it shuts down and sets 4 DTC's for the missing sensors (they are still in the post)
As i had to set the PDC to present in the IPC, i thought i'd get the display of them, but i dont, maybe this IPC only does rear display of them?? or the IPC being a 2010 version dosent do much at all, it is very basic compared to the 2014 version i had before (but destroyed)