20:th-May-2017, 07:20:58
Right sorry for delay in replying.
I've attached the 2 pin-outs you need.
X1 is the one where you will add the 1.5mm Wire into Pin 31.
x2 is just so you can see the wire that comes from the BCM 0.5mm in pin 19
The Pins for the door connectors are the same but you can get different part numbers based on size of wire.
Male one's I I just need to locate.
I've attached the 2 pin-outs you need.
X1 is the one where you will add the 1.5mm Wire into Pin 31.
x2 is just so you can see the wire that comes from the BCM 0.5mm in pin 19
The Pins for the door connectors are the same but you can get different part numbers based on size of wire.
Male one's I I just need to locate.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.