How-to Led Number Plate Lamps

[tucpal]

Here is a How-to Led Number Plate Lamps
for the Astra J 5 Door Error Free.

They can be Found on ebay.

http://www.ebay.co.uk/itm/LED-LICENSE-NUMBER-PLATE-LIGHT-VAUXHALL-OPEL-CORSA-C-D-ASTRA-H-J-INSIGNIA-VECTRA-/181596661960?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a480128c8

Here are the SMD LED Light Units and Load Resisters you will Receive
The LED Light Units have 18 SMD LED,S in Each Light Unit.



They are a very Good and a Well Made Light Unit
that are Plug and Play
the fit is Perfect and they are Error Free.



Start by fitting the Load Resisters
Plug them into the Light units.



STEP ONE.........

Remove the old Light Units from the car
by Pushing back the Clip
and Pricing the old Light Units out.





Undo the Connectors from the old Light Units.



STEP TWO...........

Now you have the old Light Units out
Remove the Bulb by Twisting them out and Remove the Bulbs
and Connect the new SMD LED Light Units to them.







STEP THREE.........

Connect the new Connector on the new Light Units
back on to the Connectors on the car
and Test that the Light Units work
if not Turn the Connector around then it will Work
but it should be Red on the new Light unit to Yellow Green on the Connector
and Black to Black.





STEP FOUR.......

There is no Real Need to Glue the Load Resisters to the Light unit
as they do get Very Hot and may Melt if you do this
Do not glue them to the Bumper they will and can Cures Damage
Again They get Very Hot.

So the best way is to Zip Tie them up like the in the Picture
then Simply Push them in too the Hole for the Light Units
and Refit the Light Units back in place
then get Under the Bumper and Pull the Load Resisters Down
then they will Just Hang from the back of the Bumper in the Air
They will not move about Much
and they will not be Touching Anything.







RESULTS.......

The results are Amazing
And they are so much Better than the Standard Light Units
they are Super Bright
and there will be no Canbus Errors.









Absolute first class Product
and i Highly Recommend them
SMD LED Light Units i love them.

AS WITH ALL ELECTRICAL HOW TOO,S.
you do this at your own risk if you follow the how to correctly
there should be no problems thank you.