I was going too @tucpal but I didn't want the sugru to set in a way where the casing wouldn't clip on. So I've just installed it now.. And wow! It's rock solid! As I say most of the adhesive putty (sugru) is on the mirror connector and I only put a small blob on the section touching the vinyl so that it would be able to hold itself while it dried.
Anyway... Had a good pull on it (yeah yeah haha) and it's secure as anything!
Inside pic
Outside pic
As you can see the vinyl is a tad smaller than the casing but I cut it that was as originally I was going to secure the casing to the glass all the way around and didn't want it being stuck to the vinyl. But don't think it looks bad myself!
Cheers for the help guys
Sent from my EVA-L09 using Tapatalk
Sent from my EVA-L09 using Tapatalk
Anyway... Had a good pull on it (yeah yeah haha) and it's secure as anything!
Inside pic
Outside pic
As you can see the vinyl is a tad smaller than the casing but I cut it that was as originally I was going to secure the casing to the glass all the way around and didn't want it being stuck to the vinyl. But don't think it looks bad myself!
Cheers for the help guys
Sent from my EVA-L09 using Tapatalk
Sent from my EVA-L09 using Tapatalk