After market Reverse sensors

[tucpal]

here is all the info i have

earth stud in the glove box rear





i keep the module in there also



live is picked up from the reverse wire positive green from here



remove the rear trim and thread the wire to the rubber boot
remove the rubber boot and pull the wire thou it tape the wire to a pen and push and pull it through it







i pulled the sensor wires up through a gromit in the wheel well
as i did not remove the bumper to fit the sensors
but if you do you will see another gromit by the rear lights you can use







hope that helps you out and do a how to mate

i am moving this thread to retro fit research also for further use..

---

move for further reference