Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tags
esp help service

'Service ESP' HELP
#1
 
Hi Guys,

I was wondering if anyone has had a similar situation or know anything that could help with my 1.4 petrol 2013 Astra GTC.
recently I had the Service ESP message come up on the dash and took it to the local friend to be read.

The following codes came up:
U0125-00
C0196-71

He isn't sure what the problem may be and I don't want to take it to the garage and they scam me an extortionate amount to fix.

My high beam '3rd' brake light also stopped working around the same time.
Reply
#2
Well the U0125-00 you normally ignore unless there is another fault to go with it.

My advise is to work on the C0196-71 which the yaw rate sensor.

C0196 71 = The yaw rate sensor offset is out of specified range

https://workshop-manuals.com/vauxhall/as..._or_c0287/

The Yaw rate sensor is under the centre console.

In terms of the brake light replace it, my advise buy new not used.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#3
 
(5:th-Jan-2021, 08:16:54)Rusty2009 Wrote: Well the U0125-00 you normally ignore unless there is another fault to go with it.

My advise is to work on the C0196-71 which the yaw rate sensor.

C0196 71 = The yaw rate sensor offset is out of specified range

https://workshop-manuals.com/vauxhall/as..._or_c0287/

The Yaw rate sensor is under the centre console.

In terms of the brake light replace it, my advise buy new not used.

Thanks mate for the reply!

I've ordered a new Yaw sensor and going to try to replace then reset it as per the instructions in the link you provided.

hopefully that sorts it )
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1.6 ecoFlex service intervals _Mita 6 6,140 2:nd-Oct-2019, 13:42:25
Last Post: _Mita

Forum Jump:


Users browsing this thread: 1 Guest(s)