+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC Technical (https://vxoc.org.uk/forum/forumdisplay.php?fid=20)
+---- Forum: Mechanical (https://vxoc.org.uk/forum/forumdisplay.php?fid=29)
+---- Thread: 'Service ESP' HELP (/showthread.php?tid=4853)
'Service ESP' HELP - AstraRT - 29:th-Dec-2020
Hi Guys,
I was wondering if anyone has had a similar situation or know anything that could help with my 1.4 petrol 2013 Astra GTC.
recently I had the Service ESP message come up on the dash and took it to the local friend to be read.
The following codes came up:
U0125-00
C0196-71
He isn't sure what the problem may be and I don't want to take it to the garage and they scam me an extortionate amount to fix.
My high beam '3rd' brake light also stopped working around the same time.
RE: 'Service ESP' HELP - Rusty2009 - 5:th-Jan-2021
Well the U0125-00 you normally ignore unless there is another fault to go with it.
My advise is to work on the C0196-71 which the yaw rate sensor.
C0196 71 = The yaw rate sensor offset is out of specified range
https://workshop-manuals.com/vauxhall/astra-j/brakes/antilock_brake_system/diagnostic_information_and_procedures/miscellaneous/dtc_c0186_c018b_c0196_c019b_or_c0287/
The Yaw rate sensor is under the centre console.
In terms of the brake light replace it, my advise buy new not used.
RE: 'Service ESP' HELP - AstraRT - 5:th-Jan-2021
(5:th-Jan-2021, 08:16:54)Rusty2009 Wrote: Well the U0125-00 you normally ignore unless there is another fault to go with it.
My advise is to work on the C0196-71 which the yaw rate sensor.
C0196 71 = The yaw rate sensor offset is out of specified range
https://workshop-manuals.com/vauxhall/astra-j/brakes/antilock_brake_system/diagnostic_information_and_procedures/miscellaneous/dtc_c0186_c018b_c0196_c019b_or_c0287/
The Yaw rate sensor is under the centre console.
In terms of the brake light replace it, my advise buy new not used.
Thanks mate for the reply!
I've ordered a new Yaw sensor and going to try to replace then reset it as per the instructions in the link you provided.
hopefully that sorts it
