17:th-Oct-2017, 07:34:03
http://workshop-manuals.com/vauxhall/ast...pl_or_lpv/
The plugs are located on the back of the engine above the cylinder head. have to remove the engine cover.
http://workshop-manuals.com/vauxhall/ast...l_and_lpv/
Module
http://workshop-manuals.com/vauxhall/ast...placement/
You need to be aware they could snap if they are tight what you could do is when the engine is hot spray some WD40 around each plug and leave it work in (do this a few times) it should help.
When refitting use some copper grease (a very small amount)
You would have to test them off the car really in a vice.
The plugs are located on the back of the engine above the cylinder head. have to remove the engine cover.
http://workshop-manuals.com/vauxhall/ast...l_and_lpv/
Module
http://workshop-manuals.com/vauxhall/ast...placement/
You need to be aware they could snap if they are tight what you could do is when the engine is hot spray some WD40 around each plug and leave it work in (do this a few times) it should help.
When refitting use some copper grease (a very small amount)
You would have to test them off the car really in a vice.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.