Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tags
nut oil sump size

Oil sump nut size.
#1
Hey guys

Just a quick one.

Have a astra J 1.7 gtc diesel. Does anyone know what size socket is need on the sump nut to drain oil.

Sent from my SM-G900F using Tapatalk
Reply
#2
Mine on the 2.0cdti was a 13mm socket so would imagine it would be the same. But use a six sided 13mm socket and not a multipoint socket as the sump plugs can be tight and you don't want it slipping and if yours isn't a nut and is a torx it will be a T45 but mine was a hex head so was a 13mm socket will be either or.

Sent from my SM-N950F using Tapatalk
Reply
#3
Hey lain

Yeah mine is in the torx family which I hate have why it could just be a normal 6 sided socket is beyond me.

Sent from my SM-G900F using Tapatalk
Reply
#4
You could go online and put your reg into euro car parts and see if there sump plugs have the hex head as that is where I get my replacement from which is a hex head, as I always change the sump plug after an oil change.

Sent from my SM-N950F using Tapatalk
Reply
#5
Hey lain that's a good idea actually.

I been on euro car oarts and the sump plug that comes up is the one with the torx. But could no ask a favour could you type in your reg and the sump that comes up could u message me the part number so I can find it on the website.

Sent from my SM-G900F using Tapatalk
Reply
#6
There's the details for the one I got so if the thread size is the same you will be ok and that will allow you to have the hex head mate.

Sent from my SM-N950F using Tapatalk
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)