Hi guys!

I have changed my OEM headlights from my Astra J, to OEM LED headlights daylight. However, the car give an daylight error. Can this be resolved by updating/change settings of the software?

Best Regards from Portugal!

Hi all I want to change all rear and front bulbs to led bulbs can you tell we what ones I need. Ie for brake/reverse/indicators and so on
Many thanks

Anybody know where to get a full plug and go compatible indicator kit front and rear.

I have upgraded my drls to led, and a hid kit, all working fine, just want to do the indicators.

[align=center]How-to DPF warning LED.

You must understand that the way this works means that if you turn on your rear demist the LED will turn on also and that you would have to turn it off to see if a DPF regen is taking place. 

Ok the first thing you need to do is get a 12v LED like below.

Blue, [url=http://www.ebay.co

Anyone know if I can put led bulbs in my drl's by adding a resistor first [Image: http://uploads.tapatalk-cdn.com/20160922...77fddc.jpg] something similar to these ?


Sent from my iPhone using Tapatalk

So I purchased myself a set of GM LED tail lights on ebay, fitted them and they throw up "check brake light". 

[Image: http://i63.tinypic.com/28be0p0.jpg]

[Image: http://i68.tinypic.com/2u4pxc8.jpg]

[Image: http://i66.tinypic.com/2j1vhw6.jpg]

I could just live with it but wanted to see if I had any options.
I have seen something called HappyBlue OBD, which according to the notes allows for "Checkcontrol to Overwrite Failure / LED Expansion" has anyone ever used it?

http://w

Does anyone know if anyone makes an LED side repeater for the J like they do for the H they show up far better but I cannot find one anywere just the smoked ones thanks

Hello,
I made t20 led using 12v g4 led. The g4 led is used for home lighting. G4 led is 12v and 2 watts. I will try to explain how I do it.

[Image: http://i.hizliresim.com/77ZO9Y.jpg]

I soldered 2 pieces of copper wire to + side. I soldered 1 pieces of copper wire to eksi side. 

[Image: http://i.hizliresim.com/l31LkE.jpg]

Then I used the piece of the old t20 LEDs. I connected the positive cables in parallel and there was no error in the car.

[img]http://i.hizliresim.com/VPYAl

Hi anybody tried fitting these EBay item number 371098650242 being as The Cascada uses the same wings was wondering if they would fit without modification

Wayne

i have put some led lights inside my car power via the fuse box in glove box

but they seem to stay on when i take the key out unless i turn them off myself is there a certain slot i should plug them into?

thanks