[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

How for the following switches

EPB switch

Tools required
7mm socket
T20 driver
Rachet
Small screwdriver
Qty 1 PLCC-2

Using the info in Tucpal thread remove the [url=http://www.vxoc.org.uk/forum/Thread-How-to-remove-the-center-console-EPB-switch]C

[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

This is How-to for changing the LEDs in the stereo and centre console switches

Tools required
Stubby Philips s/driver
Small flat blade s/driver
7mm socket
T8 driver
Fine tip soldering iron
Qty 30 805 smd leds for stereo

Start by removing the following parts. 1. Rubber mat 2. Plastic cover 3. Gear gaiter
[img]https://www.vxoc.org.uk/Images/vxoc%20astra-j-gtc/LED%20Conversions/How-to%20Stereo

Hi Mates,

I changed the leds of the uplevel display in my speedometer, but just have a look

[ATTACH=CONFIG]193[/ATTACH]

I have made an instruction in how to disassemble the speedo, but only in german, you can find it here: KLICK

Has anyone used LED headlights ??

http://www.ebay.co.uk/itm/131231605267?_...EBIDX%3AIT


i don't want HIDS as i don't have projectors
but think these may be good maybe thoughts please.

[align=center][Image: http://i179.photobucket.com/albums/w301/...5fce57.jpg]

Ok i found out that when i put the Load Resistors on the LED DRL,s
the Errors Message on the Canbus has also Canceled the Errors for the Rear Tail Lights also
so this Means i can Have LED Ttail Lights also
i got these Projector LED,s w5w, t10, 501.
and can be found on eBay
you will need 6 bulbs
but please use the Link as a Reference to find them as They are £7.99 for two
but this Link say

So looking on eBay has anybody tried these to see if they are error free?

http://www.ebay.co.uk/itm/291132387698?_...EBIDX%3AIT

http://www.ebay.co.uk/itm/351057005926?_...EBIDX%3AIT

Does anyone else's car struggle to detect that there are LED street lights so sticks main beam on?

They have recently replaced all the local street lights to the LED style which is great but now if I have High Beam Assist switched on the car thinks there are no street lights so it puts high beam on.

[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

How-to LED rear reflectors.

You will need the following items.

1. A pair of reflectors.
2. A Stanley knife with some Sharpe blades.
3. Plastex (CLEAR) you can buy it here http://www.repairproducts.co.uk/page20.htm
4. A pair of RED LED strips [url=http://www.ebay.co.uk/itm/171505511260?_trksid=p2059210.m2749.l2649&var=470532550287&ssP

This may be a good option for the LED DRL
as you know i have already done this but i have not seen this type
of LED before

https://www.youtube.com/watch?v=dOh7F78I-hg

found the site but no English

https://www.google.co.uk/url?sa=t&rct=j&...OknKzTPu3w