So I'm adding In a cheap Chinese reversing camera.
I'm using a relay to bring on the camera I'm sorted with how I'm going to wire it, just one thing stumped me.

https://imgur.com/gallery/PwuhgbJ

I expected the green/white cable to still be in colour when it passed through to the boot lid.

I haven't had the roof lining off yet just wondered if anyone knew if there was a connection on the car side in the roof lining with the correct colour? And if there is where is it roughly? Or even is there

Hi everyone, i have a 2013 J OPC with doors that will no longer open from inside or out. Im limited to getting in and out via the boot.

I took the door trims off to put in new speakers and sound deadening on the metal skins. With everything back together now the doors wont open from inside or out. The central locking seems to make the normal sounds, the interior handles pop up the door pins so the cable is still connected (even without the cable connected i could open the door from the outsid

Hi All,

I have just bought a 2011 Astra SRI 2.0 CDTI.

However pleasing the car is to drive there are a few things I would like to change (if possible)

1. LED Headlight conversion (factory or Aftermarket best??)

2. 19" Wheels (Good or Bad???) it currently has 17" but need refurbing

3. I would love to get a better exhaust as the standard doesn't really have any noise, I only want a little burble nothing massively loud but can only find VXR or GTC Units available?

any help would b

Hey guys.

I had by car jacked up in the air with both calipers showing the pistons. When I pressed brakes only the passengers side piston would come out. When I original took calipers off the both retracted fine it's just that it won't come out??

The passenger side brake disc looks worse then the drivers as it is all rusty and not shiney but drivers side looks shiny. as hence why I thought something was wrong.

Anyone have any ideas to issues?

Thanks any help welcome.

Sent from my SM-G90

Hi people I have bought an air induction pipe from eBay brand: DNA this is going to be a stupid question but I’m stuck on how to fit it iv been out and tryes but I don’t feel it fits correctly, and it also has a valve piece on it which I don’t know what for ??
TIA


Sent from my iPhone using Tapatalk

---

[Image: https://uploads.tapatalk-cdn.com/2018091...ea19b4.png]


Sent from my iPhone using Tapatalk

[align=center]Hi guys need advice. I have a gtc 2.0 diesel. Car was serviced a couple of weeks ago and got timing belt done too. Car has done 70000 miles and is a 2012. Anyway to cut a long story short, when I left garage warning came up service car soon, rang garage they said turn car off and start again and message should go away, which it did. Driving home from work today service car soon came on again and car immediately stalled. Nursed the car home but I had to go out again., service car so

Found this wire behind the radio can is it the centre speaker wire ??
[Image: https://uploads.tapatalk-cdn.com/2018110...2e1985.jpg]


Sent from my iPhone using Tapatalk

Hi i am looking for a timing kit for my 1.6t a16let astra 2012 j series gtc.

It needs a head gasket change and maybe skim but need the timing tools first.

I see loads on ebay for the j series 1.0 1.2 and 1.4 but not the 1.6turbo.

I have found one lazer kit but says a16xht instead 1.6sidi so might be wrong one. the 40 ebay ones are usually what i use As this is a one time use i dont mind the cheaper kits if i can find them. I have a few cheapers kits and they do fine for non commercial use.

Hi all hope I'm posting in the correct place

I need to remove the A pillar interior cover on the passenger side of my car to fit a dashcam and a few other wires for my new stereo 

it doesn't have the airbag clip to flick out or a screw . I wondered if anyone knew a easy way to remove it before I yank it out and break it lol

Hi guys 

Just installed the S106/M072 has been working ok but we changed from Dalvik to Art and now the system is stuck in boot loop with bouncing balls, 

After reading up on this I can see that I would need to do a full reset, 
I have tried several things and cant get in...

is there any friends out there got the firmware to reflash can't cope with no sounds driving to and from work, but i do have the sounds of my indicators  and parking sensors lol

any help would be great   :looney