So, i have this insignia cluster, up level display. 

and i have a clone tech2,  

tried to add the insignia cluster to my car and i guess predictably it refuses with a hardware mismatch.

i altered the eeprom to have my cars vin number and security code.. i couldnt figure out whdere the mileage is stored in the eeprom dump... so i left that bit alone... this was enough to allow me to do a 'program' session on the BCM which removed the mileage lock out that i'd triggered on the insignisas

Hi there
Last year I bought some aftermarket projector headlamps for the astra, they come with their own wiring and ballasts, recently I've been looking at a HID kit and wondering wether or not it would fit? The headlamps take H7 bulbs and has the connector that fits into the back of the bulb as normal, anybody able to give advice?


thanks

Hi all so I have fitted the module and the bracket also fitted the aerial bit on the tailgate zr part.

Now I need to know what length wire and type of wire I need to for to the zr part.

And am I right in thinking there should be a double plug under the headlining for the fm and dab?

Many thanks

Hello All. I hope somebody can help me. I have a 2015 Astra J 2.0 cdti  Elight with a Navi 650. I have fitted a Xbox unit & reversing camera that is working great. Now I am fitting a four antenna DVB-T2 unit but I have lost the fitting instructions. I can remember most of the connections but am stuck on three wires. Purple TX. Green RX. and White IR. I seem to remember one or two wires connected to the handbrake circuit but not sure which ones. Thanks. best regards.  kipper

Hi, I'm looking to fit a downpipe and an intercooler onto my 200PS Astra J GTC, as I have access to a 265PS tuning map with these mods. I am looking to leave the main cat as the standard Vauxhall one, and leave the rest of the exhaust standard too.

Will this pass an MOT?

Thanks.

Hi, I'm looking for an intercooler kit for the Astra GTC 1.6T 200ps version, engine code A16SHT. But all I can find online is kits for the older Astra GTC 1.6T 180ps version, engine code A16LET.

Does anybody know if the fittings for an intercooler kit are identical on both models?

I know when I was purchasing a downpipe, the fittings were totally different.

Thanks, Steven

i am trying to fit the factory PDC system to my 2010 vauxhall astra elite j i have to control module and the button but i don't know what wires i need i have the wire with the sensors on but i don't have what that plugs in to. with the control module connected when i put the car in to reverse i get a beep and the light on the button flashes. and when pluged in to my scanner i and getting codes forthe front and raer sensors missing. i am wanting to do both front and rear but will start with the r

Hi there,

I've seen on a youtube channel a review for one Astra J OPC from Netherlands which had valve exhaust system installed , the man sad that everything is on 3" , deleted cat, deleted middle silencer, no brand exhaust or similar.

I wonder if someone here installed such a thing and how it was connected, as far as i know that valve needs to cut off one pipe and let another free, but VXR has only one pipe until the backbox

I've asked the guy on instagram he said he would send some pi