Hey guys!

My A20DTH160HP 2010 Insignia seems to be suffering from a worn out or damaged flywheel. It started with a small rattling noise and now, over the winter, the sound is louder than the aircon maxed out, the car vibrates at idle, it jutters whenever I shift gears or when I release the clutch pedal pulling off from a stand still. Engine braking also starts to sound like engine breaking.  

Everyone seems to suspect that the flywheel is either worn out or damaged (the dampening springs

Hi all just decided i should start a progress thread so i could see the transformation of my car.

Ive had her since May 2016

[Image: https://s30.postimg.org/6fykt74f5/astra_GTC_front.png]
[Image: https://s29.postimg.org/lvm8ixpmf/astra_GTC_rear.png]
[Image: https://s2.postimg.org/v6hp78mvd/astra_GTC.png]

Features of her were
20" alloys
AFL
LED rear lights
Flexiride suspension as well as all standard SRI spec.

---

Decided to start de chroming my car this week

[img]https

Will re-maping my astra lose eco mode ?

Sent from my SM-G930F using Tapatalk

Hey, 

I'm new here and been modifying cars for years.

Just picked up a lovely 13 plate Elite, loving the car having had a broken Vectra C for the last month or so. I have always said since i installed xenon headlights in a Volvo years ago i would never go back to halogen headlights and boy with the AFL's that has just made that decision concrete for the future..

I was looking at a 09 plate GTD before this one popped up, with this spec and the cost i honestly couldn't say no.

Specific

Hi Guys cheers from south Spain, Sevilla. Just got my Astra GTC 2.0 CDTI - White, and so far loving it very very much! . This forum helped me a lot during the research phase, I wanted to thank everyone here!

Hi,

I live in the West Mid's and I've recently been thinking about getting my car re-mapped.

However, I've read online that because the 2.0 CDTI unit in my 14 plate Tourer has S/S the ECU has to be completely removed and sent away to get reprogrammed which usual takes a couple of days. Unfortunately, as the car is in constant use this just isn't an option.

So, does anyone know whether this is still the case and can anyone recommend anyone in my area who can do the remap?

Thanks

[Image: http://i1086.photobucket.com/albums/j447...CF1425.jpg]
Here's my car, a 2014 Astra Elite Tourer 2.0CDTI. I only got her in October last year and to date she has covered just over 18K.

Since joining this site I've carried out a few small mods...

[url=http://s1086.photobucket.com/user/Mightymagnus78/media/Astra%20J%2

I was speaking to a workmate a while back who'd been telling me that his Insignia engine had seized. He said he was told something had blocked the flow of oil in the engine. Said it had just been serviced. I think it was an 09 or 59 plate.
If you look on line, there are a few stories of Insignias with the 2.0 cdti engine that have shown a low oil pressure warning before seizing.
There are even one or two Insignias for sale on various sites needing new engines, that look otherwise in good order

Hi all,

Whats the official, and also recommended Cambelt Change Interval on an Astra-J 2011, 2.0 CDTi?

When I bought the car, I was told 8 Years or 80k, im now hearing it could be 100k or 6 years?

Can you guys please advise as 3 Vauxhall garages have told me different things.

Thanks,
G.

Hi all,

To start, sorry for m'y english level, I'm French.

I need your help... The engine of my car Opel Astra 1.7 CDTI 110CH is KO. I must change it. The engine code of this last is A17DTC, but I do not find any engine used or new on the web with this code. But I found many A17DTE engine new or used.

My question is, do you know if this engine will be compatible with my car ? 

Thank you for your help and sorry for my English.

Regards,