Switch to desktop version  
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tags
some help need

need some help
#1
As some of you already know I've tried changing indicator bulbs and stalled really because I haven't got the right bulbs to replace them with, the metal clip fell off and I need to know how it fits back on properly, anyone got a pic handy, need to put the car back together asap
Reply
#2
I SHOW THE CLIPS IN HERE MATE

http://www.vxoc.org.uk/forum/Thread-Silv...ator-bulbs
Reply
#3
cheers mate i knew i'd seen a pic of them on here somewere but i could not find it, ended up taking the bumper off altogether
Reply
#4
the pre facelift bumper is not easy to do you will not be the first to take the bumper off
but very easy when you have done it once
Reply
#5
It should maybe be noted that the final step if removal and then the first step of refitting is a 2 person job, 1 person to hold the bumper close to car while other, unplugs/plugs in the wiring harness **

Edited typo
Reply
#6
I always put the bumper on a couple of chairs.


Sent from my iPhone 5c using Tapatalk.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.
Reply
#7
didn't think of that, a neighbor just pulled up so i just asked him to plug wiring in while i held it
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)