|
need some help - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Request for information (https://vxoc.org.uk/forum/forumdisplay.php?fid=24) +--- Thread: need some help (/showthread.php?tid=879) |
need some help - Gilmore - 29:th-Aug-2014 As some of you already know I've tried changing indicator bulbs and stalled really because I haven't got the right bulbs to replace them with, the metal clip fell off and I need to know how it fits back on properly, anyone got a pic handy, need to put the car back together asap need some help - tucpal - 29:th-Aug-2014 I SHOW THE CLIPS IN HERE MATE http://www.vxoc.org.uk/forum/Thread-Silvertech-indicator-bulbs need some help - Gilmore - 29:th-Aug-2014 cheers mate i knew i'd seen a pic of them on here somewere but i could not find it, ended up taking the bumper off altogether need some help - tucpal - 29:th-Aug-2014 the pre facelift bumper is not easy to do you will not be the first to take the bumper off but very easy when you have done it once need some help - Gilmore - 30:th-Aug-2014 It should maybe be noted that the final step if removal and then the first step of refitting is a 2 person job, 1 person to hold the bumper close to car while other, unplugs/plugs in the wiring harness ** Edited typo need some help - Rusty2009 - 30:th-Aug-2014 I always put the bumper on a couple of chairs. Sent from my iPhone 5c using Tapatalk. need some help - Gilmore - 31:st-Aug-2014 didn't think of that, a neighbor just pulled up so i just asked him to plug wiring in while i held it |