Welcome back to the VXOC FORUM.
Sorry for our lack of support over the last year but MYBB is back and so are we.
Let's get the forum buzzing again... (March 25, 2022)x
Can anyone help me with my navi950 with some wiring diagrams. My last post was deleted, I don't know why. I got it All fitted in everything works OK apart from radio signal and mic connection
Thanks
John
23:rd-May-2017, 09:00:51 (This post was last modified: 23:rd-May-2017, 09:12:17 by Jpbroad1970.)
hi, I went from a cd400 with dab and Bluetooth , ive sorted the mic I think its just the radio reception. nav system work fine . I have the shark fin on the back
(23:rd-May-2017, 09:00:51)Jpbroad1970 Wrote: hi, I went from a cd400 with dab and Bluetooth , ive sorted the mic I think ,its just the radio reception. nav system work fine . I have the shark fin on the back, although its a dummy
I have 2 aerial amplifiers at the back plus the dab one as I can see from epc and a dummy shark fin. is there any chance you could give me the instructions for what you did. I take it the roof aerial is just for the gps or am I incorrect
I was thinking checking the aerial connections as all the aerials worked OK on my cd400. I get a very muffled low sound with a lot of hiss so it could be the amps not powering up. Will check that on multi meter. I'm not bothered about the onstar working at the moment that's a later project. Have to see which wire powers the amps up
NAVI950 , DAB+ & Rear Camera , quick heat, auto lights and rain sensor retrofit