Remap package for my GTC

[tucpal]

they use an IPF flash it is like the blue fin unit you plug it into the diagnostic socket
and upload the map then you can put the car back to standard if you wish then up load the map again etc
you can also update the IPF flash if you remove the DPF etc and want a new map.

HERE IS SOME INFO



This is for the EDS IPF Handhelt Unit ONLY. This is the option for customer who have already had EDS Software installed by an official distributor and would like to use the IPF to return their vehicle back to stock or flash different maps at their convenience. See below for more information...

The EDS IPF (Intelligent Power Flasher) allows you to upgrade the software of your vehicle or 'flash' your vehicle with performance software which has already been developed in-house at EDS or at Regal Autosport on their dynometers and thoroughly tested before release.

All you need is an internet connection and a PC running Windows XP or Windows 7 with a USB 2.0 port to use the IPF system. Simply choose your tuning file from the dedicated EDS server and then load the software on your car. Fitting a full exhaust next week? Simply download the exhaust-specific ECU map at the same time to fully benefit from the upgrades!

The EDS IPF works by plugging into an OBD2 port where it automatically detects the make and model of your car. Once plugged into a compatible PC via USB, the IPF software will then allow you to transfer a new map to the Power Flasher device which can then be uploaded to your car by simply plugging it back in. It really is that simple.

What's in the box?

- 1 x EDS IPF System travel case
- 1 x EDS IPF flash tool
- 1 x OBD2 connection lead
- 1 x USB 2.0 connection lead
- 1 x instruction manual (also a link where to download the operator)
- ONLY works with Windows XP / Windows 7 / Windows 8 / VISTA + MAC ARE NOT SUPPORTED!!!

Note: Stage 2 / 3 files are available for most vehicles, when the hardware is purchased through Regal Autosport or an official distributor there will be no charge for Stage 2 or 3 files. IF there is no file available a software request will need to be made, additional costs may apply.