AFL / Xenon retrofit

[Rusty2009]

Right just an update I've had a free day today.

I'm getting nowhere re a new board All I keep getting is I already have the board and that it covers halogen/Xenon despite they can't answer why they list over and over with different options.

So removed the halogen lights removed all wires for the halogen system from the fuse board.

Put all the xenon wires in and hooked up to the BCM, I then paid for an hours use of GDS and found I could talk to the Headlamp/ AFL control module (If not installed you get no communication error).

I could control the up to down left to right also could change the lighting set up I could also relearn the leveling sensors.

With that In mind I paid for an hour of TIS was able to program the Headlamp control with the up to date software was also able to set up the module.

So from all this I think it should be a case of A VCI code to have the system fully working, sadly I've not got the spare ££'s to request the VCI's but I also want to look abit deeper into that first.