8:th-Oct-2020, 13:12:15
Hi, they should fits. The main connector pin-out is the same.
Question is just how the BCM will react on the higher DRL consumption, but I think there will be no error massage and it will work fine.
Actually I have swapped vice-versa :-) and just add resistor due to lower current consumption of the LED DRLs.
Question is just how the BCM will react on the higher DRL consumption, but I think there will be no error massage and it will work fine.
Actually I have swapped vice-versa :-) and just add resistor due to lower current consumption of the LED DRLs.