1:st-Mar-2020, 19:25:15
(1:st-Mar-2020, 18:35:36)auzo63 Wrote:(1:st-Mar-2020, 09:06:22)Rusty2009 Wrote:(29:th-Feb-2020, 17:20:59)auzo63 Wrote: Any update on this?
I have an ex MOD Astra with no steering wheel controls, I have purchased a replacement steering wheel and squab and fitted them but as the previous message only the buttons light up but none of the switches work.
I have voxcom but cannot see where to program this?
Can anyone help? And can it be programmed for the cruise control buttons to work too?
You can't use vauxcom for this.
it would need need an MDI and SPS, some you need a VCI also.
From a couple of VINS I've to sent to GM they wont support C/C if the car didn't leave the factory with it.
Would it work if i was to fit a reset BCM and could VAX-COM program it?
Please see my reply you quoted above Vaux-com will not do it.
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.