29:th-Mar-2018, 18:26:51
Just done this:
Soldered an 8 pin dip socket on to the eeprom pads.. just had to adjust the pins a little to get them to fit nicely.
shame the other IPC's have the eeprom on the front,
Wont be able to have a play till after the weekend, going to the GF's place and having a look at her sisters ford fuckus that's failed it's mot for abs light being on... hope i can get the cheapie elm327 dongle to read the abs ecu on it.... and i imagine fords are not one of the cars that a tech2 can read with a different card.
Soldered an 8 pin dip socket on to the eeprom pads.. just had to adjust the pins a little to get them to fit nicely.
shame the other IPC's have the eeprom on the front,
Wont be able to have a play till after the weekend, going to the GF's place and having a look at her sisters ford fuckus that's failed it's mot for abs light being on... hope i can get the cheapie elm327 dongle to read the abs ecu on it.... and i imagine fords are not one of the cars that a tech2 can read with a different card.