![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
29:th-Mar-2018, 11:33:08
I did try mounting the eeprom from the KPH speedo i have on wires to a dip socket, and soldered the eeprom to an adapter to plug it in... with the wires coming out the speedo housing.... but the tracks keep lifting on that pcb and it's dead now (my fault, i was impatient and tried to de-solder the eeprom with a soldering iron rather than hot air.. and overheated things a little)
But i wanted to try and see if i could set it to a uk mph one.
the insignia speedo is better in that the eeprom is on the back, so no need to pull the needles and dial face off each time... so i might mount that eeprom on a socket so i can program it easilly.
but really i want to be able to do a tech2 programming session, then read the eeprom to see what's changed, but cant do that with the insignias ipc.... unless... i use the chassis number from the insignia to get the tech2 to talk to it.
But i wanted to try and see if i could set it to a uk mph one.
the insignia speedo is better in that the eeprom is on the back, so no need to pull the needles and dial face off each time... so i might mount that eeprom on a socket so i can program it easilly.
but really i want to be able to do a tech2 programming session, then read the eeprom to see what's changed, but cant do that with the insignias ipc.... unless... i use the chassis number from the insignia to get the tech2 to talk to it.