27:th-Mar-2018, 21:50:25
the MIL and airbag lights are only on the insignia (and kph meriva) cluster... when i put my original cluster back in, those lights are not lit... i believe in a crash those lights are like triggered to stay on in the ipc untill it gets the code saying the airbags and that lot have been replaced... which with a mismatched part DTC.. i cant comunicate with it to clear them... i'm making this up as i go along here
i did try going into my SDM and reset it, and still got the lights on the crashed clusters.
not that it matters.. but being a meriva i can't use GDS2, so i'm using the tech2 in pass thru mode, using globaltis 32b SPS to program things.
The eeprom dump from the insignia cluster is on my netbook.... and i cant access that right now, but i can get the dump tomorrow,
i think i get 2 nag screens, one for service airbag, and service park assist, i have a feeling the air bag one wont be so easy to fix.... i guess the identifier code is in the MCU.. the bit that tells the car it's not from a meriva.
i did try going into my SDM and reset it, and still got the lights on the crashed clusters.
not that it matters.. but being a meriva i can't use GDS2, so i'm using the tech2 in pass thru mode, using globaltis 32b SPS to program things.
The eeprom dump from the insignia cluster is on my netbook.... and i cant access that right now, but i can get the dump tomorrow,
i think i get 2 nag screens, one for service airbag, and service park assist, i have a feeling the air bag one wont be so easy to fix.... i guess the identifier code is in the MCU.. the bit that tells the car it's not from a meriva.