![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
14:th-Aug-2016, 08:08:00
Right ok now I'm confused as you say they are factory fitted and then not factory fitted.
You will not be able to make AFL work without a VCI code and GM no longer support AFL retrofit, Also OP-COM is not capable of this.
The error is telling you DTC B101E 4B: Electronic Control Unit Software Calibration Not Learned, meaning the AFL module has not been calibrated, In SPS after programming you would go back into the AFL module and then do config and setup.
As for your other error it's a commutation error (you normally ignore U-codes) but here is a link with some info
http://workshop-manuals.com/vauxhall/ast..._or_u2100/
You will not be able to make AFL work without a VCI code and GM no longer support AFL retrofit, Also OP-COM is not capable of this.
The error is telling you DTC B101E 4B: Electronic Control Unit Software Calibration Not Learned, meaning the AFL module has not been calibrated, In SPS after programming you would go back into the AFL module and then do config and setup.
As for your other error it's a commutation error (you normally ignore U-codes) but here is a link with some info
http://workshop-manuals.com/vauxhall/ast..._or_u2100/
![[Image: Rusty-2_zpsuzrvgsp6.GIF]](https://www.vxoc.org.uk/Images/rusty/post%20images/Rusty-2_zpsuzrvgsp6.GIF)
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.