![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
2:nd-Jun-2016, 07:47:06
I watched wheeler dealers the other night and they used to methods to remove dents.
1. was tool that heats the metal and as you run the tool over the dent disappears No repainting needed.
2. was type of puller tool with rubber things comes with a glue which you put on the rubber then stick it to dent then use the puller, the glue is removed with a solvent, again no repainting needed.
Not sure if any of them work work for you though.
1. was tool that heats the metal and as you run the tool over the dent disappears No repainting needed.
2. was type of puller tool with rubber things comes with a glue which you put on the rubber then stick it to dent then use the puller, the glue is removed with a solvent, again no repainting needed.
Not sure if any of them work work for you though.
![[Image: Rusty-2_zpsuzrvgsp6.GIF]](https://www.vxoc.org.uk/Images/rusty/post%20images/Rusty-2_zpsuzrvgsp6.GIF)
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
I can do programming and retrofits using genuine GM MDI and Dealer software.