28:th-Feb-2016, 23:56:29
Its easy enough to do mate. Remove the wiper arm from the exterior using a 13mm socket or spanner and then wiggle it free from te motor spindle. On the interior there is a T20 torque screw holding the rear trim panel onto the boot lid so you will want to remove this first. Once the screws out the panel can be pulled off, just be careful not to pull to hard otherwise you risk cracking the plastic. Once thats off and out the way all you need to do is remove the connector from the motor and tape it up securely. Then remove three bolts that hold the motor in place (cant remember what size) and then you can pull it out from the lid and window. Then just pop in a grommet to cover the hole, again I cant remember the size of it but there pennies to buy and you usually get a few in a pack.