4:th-Jun-2015, 08:38:54
So thanks to the help of @cornishtaz we replace my standard preface lift bumper for a better look facelift bumper.
So first was of course to remove rear bumper
Then remove the old support brackets, need to also remove the crash bar with a 15ml socket.
Then fit the new support brackets, also needed to drill an extra hole for the side supports. Once middle two are one can refit the crash support.
End result
So first was of course to remove rear bumper
Then remove the old support brackets, need to also remove the crash bar with a 15ml socket.
Then fit the new support brackets, also needed to drill an extra hole for the side supports. Once middle two are one can refit the crash support.
End result