This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Welcome back to the VXOC FORUM. Sorry for our lack of support over the last year but MYBB is back and so are we. Let's get the forum buzzing again... (March 25, 2022) x



Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[-]
Tags
progress thread chrisb2511

chrisb2511 Progress thread
#51
[Image: f8f9d2700243a717999c3f566aa85651.jpg]

Just seen this online. Maybe paint your letters red?
Reply
#52
(4:th-Jul-2016, 16:42:03)mrtc Wrote: [Image: f8f9d2700243a717999c3f566aa85651.jpg]

Just seen this online. Maybe paint your letters red?
I did think about it but decided to go just black for now. It might be something i change later on though
Reply
#53
[Image: received_533236506869090_zpstti88m5m.jpeg~original]
Ordered these. Im going to put one on the red part of my front grill but cant decide which one to use! The black and red is nice but might not stand out with the red. The silver and black will match the one ive ordered for the back though
Reply
#54
Finally got the front one on[Image: 20160705_103515_zpsjem09a3g.jpg~original]

So this where im at so far. Debadged of all writing and front and rear griffins blacked out. Still looks very standard to me though
[Image: 20160705_104359_zps7zdoucdb.jpg~original]
[Image: 20160705_104507_zpsk280umuu.jpg~original]
Next up i think will be the calipers and the dull plastic on the front bumper needs wrapped or painted gloss black.
Reply
#55
Looks awesome mate, I'm going to do the same on mine but yellow instead of red
Reply
#56
very nice
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#57
So today i planned to do my service but apparently i dont have a jack in my boot lol so a slight set back! I changed the air filter for a K&N anyway and did the dettol spray aircon clean and replaced cabin filter behind glove box. [Image: 20160727_160415_zpsjmvwnjkq.jpg~original]
[Image: 20160727_155959_zpsxybxmxfb.jpg~original]
Judging by all the crap in there it was well overdue!
[Image: 20160727_160733_zpsrjaeddxz.jpg~original]
Reply
#58
that will help a lot as the other was so dirty haha
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#59
Nice.. Where is the rest of the bird? =)
Reply
#60
(27:th-Jul-2016, 20:38:02)hejhopp123 Wrote: Nice.. Where is the rest of the bird? =)

It got stuck in my front grill when i hit it doing about 90 lol
Reply
#61
Changed the oil today! Feeling very accomplished lol it was trickier than i thought due to the filter housing playing hide and seek. I followed the how to guide but mine was different and was sideways instead of upside down and i had to get to it from the wheel arch and from above by the belt! It was also a 32mm socket required and not a 24mm. And guess what socket i dont have.......32mm!! So i had to use a spanner and do it by hand a little turn at a time. Lol had fun doing it thats for sure :-) next step is the fuel filter!
Reply
#62
Well done
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#63
Next day off i get im putting these in![Image: 20160729_123736_zpsubcza5c4.jpg~original]
Reply
#64
Look good
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#65
So this came in the post the other day :-) when i get a bit of time im gonna change the number colours to the same as mine. And then get the stitching colour changed somehow. Wish there was a way of taking gaiter off without damaging it.
[Image: 20160730_221857_zpsgmff1v2h.jpg~original]
Reply
#66
It is hard not to damage it
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#67
(31:st-Jul-2016, 13:53:55)tucpal Wrote: It is hard not to damage it

There is a black ring underneath holding gaiter in place but i cant find any way of getting it off without breaking it
Reply
#68
stage 1 complete :-) now to change the stitching white or possibly red somehow
[Image: 20160801_052635_zps46vymiia.jpg~original]
Reply
#69
Nice job there.

Sent from my SM-G920F using Tapatalk
Reply
#70
Fitted this little toy to the car and im having a play around with the settings to see which i like best!
[Image: 20160818_183846_zpsbdt7ecw3.jpg~original]
Put the control up through the small cubby hole under the steering wheel

[Image: 20160818_183929_zpskxt9n9az.jpg~original]
Reply
#71
very nice
[Image: DSC03659_zpssmtodvyc.jpg]
Reply
#72
Nice.

Sent from my SM-G920F using Tapatalk
Reply
#73
Fitted this bluespark chip a couple of days ago and im a bit disappointed really. I was expecting it to turn the car into a rocket ship but the difference is minimal if any. 
[Image: 20160824_064953_zpslckbqt2h.jpg~original]
Reply
#74
(24:th-Aug-2016, 08:27:44)chrisb2511 Wrote: Fitted this bluespark chip a couple of days ago and im a bit disappointed really. I was expecting it to turn the car into a rocket ship but the difference is minimal if any. 
[Image: 20160824_064953_zpslckbqt2h.jpg~original]
Not good. Did you buy it new from bluespark or second hand? Is it on their standard settings? Is that the entry level unit or the one with boost control?

You should at least feel better responsiveness thru the gears and it should pull a little harder.



Sent from my SM-G920F using Tapatalk
Reply
#75
(24:th-Aug-2016, 08:53:41)marcus Wrote:
(24:th-Aug-2016, 08:27:44)chrisb2511 Wrote: Fitted this bluespark chip a couple of days ago and im a bit disappointed really. I was expecting it to turn the car into a rocket ship but the difference is minimal if any. 
[Image: 20160824_064953_zpslckbqt2h.jpg~original]
Not good. Did you buy it new from bluespark or second hand? Is it on their standard settings? Is that the entry level unit or the one with boost control?

You should at least feel better responsiveness thru the gears and it should pull a little harder.



Sent from my SM-G920F using Tapatalk

I got it on facebook 2nd hand. Its the 1st generation box it says cr tech on it not cr tech2. There is a little bit more power but nothing to shout about.
Reply
#76
The Racechip one is the same. Pulls a bit harder but no more than 5% improvement on standard settings. My dpf didn't like it when I cranked it up to max setting.

Sent from my SM-G920F using Tapatalk
Reply
#77
Put this VXD badge on the back but im unsure if i really like it or not :-/ any thoughts??
[Image: 20161025_132726_zps5mqjqzcr.jpg~original]
Might leave it on for a while and see if it grows on me.
Reply
#78
I had one on for a few days as well but took it off in the end. I swapped it for the genuine Turbo badge which I still have on.

Sent from my SM-G930F using Tapatalk
2019 Seat Ateca 1.6 DSG XCellence 

Past 2015 Ford Focus 1.5 Titanium X 
Past 2012 VX Astra 2.0 Cdti Sri Vx Line 
Past 2008 Civic 1.8 Type S

 


Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Progress thread Rusty2009 Rusty2009 416 200,426 27:th-Mar-2022, 09:32:35
Last Post: Rusty2009
  Progress thread : White Astra 2.0 Cdti Sri vx line marcus 193 102,532 1:st-Aug-2021, 11:24:07
Last Post: Chip
  Progress thread - AstraRT AstraRT 5 5,004 10:th-Jan-2021, 08:35:22
Last Post: Rusty2009
  Qaranc's Astra progress Qaranc 12 10,460 7:th-Nov-2020, 08:06:37
Last Post: Jetcolour
  Alex's Progress Thread AlexFitton 95 47,511 27:th-Jun-2020, 08:53:48
Last Post: Rusty2009
  Sparkyscfc74’s progress thread sparkyscfc74 485 570,435 13:th-Jun-2020, 08:24:38
Last Post: Rusty2009
  JohnL's VXR Progress thread JohnL 17 15,067 15:th-Feb-2020, 12:38:28
Last Post: olihil18
  Where's my thread? Telsun 2 3,967 1:st-Jan-2019, 09:49:57
Last Post: Telsun
  Progress Thread Conor97 Conor97 28 14,834 9:th-Sep-2018, 19:37:44
Last Post: Conor97
  Progress Thread: Sheppy1 sheppy1 1,759 799,014 30:th-Aug-2018, 09:45:17
Last Post: sparkyscfc74

Who read this thread?
1 User(s) read this thread:
iNeoTom (4:th-Mar-2024, 21:47:14)

Forum Jump:


Users browsing this thread: 1 Guest(s)

Switch to mobile version