Meguiars Scratch X 2.0

[dutton84]

Misses messing up the car again! Think she's bored of curbing the alloys so decided to scrape past a white Audi A1 when pulling out of a road. Managed to get all the paint transfer off and a few of the lighter scratches. Just left with a few tiny dents and scuffs. This stuff is really good though

The damage





Stage one - washed it down then used scratch 2.0







Stage 2 - had another go the next day to get the remainder off. A lot of elbow grease required.






Sent from my iPhone using Tapatalk

[tucpal]

NASTY but looks like you have done your best

[Rusty2009]

Oh dear must say you've done a good job there tho mate.

[Tonto]

Very well done, good job! Now the Mrs is barred from driving the car??


Sent from my iPhone using Tapatalk

[dutton84]

Ha. To be fair she's a good driver. 1st accident she's ever had that's been her fault (if you don't include the alloy curbing)

Anyone tried getting dents out before? You can see them in this image. Or is it best left to the professionals




Sent from my iPhone using Tapatalk

[husooz]

I think this is not avaible for deep stratches. because your problem look like only rubbing construction material.

if have deep one; must be painting.

[J1ODYA]

Why are you not claiming off insurance? Surely the A1 is?

Sent from my SM-G920F using Tapatalk

[dutton84]

Yeah the a1 is claiming off my insurance but if I want my car repaired I have to pay the first £350


Sent from my iPhone using Tapatalk

---

The picture above is after the 1st attempt of getting all the paint off. There are no white marks at all anymore, just 2 dents. If I could get them out it wouldn't be to bad.


Sent from my iPhone using Tapatalk

[Rusty2009]

I watched wheeler dealers the other night and they used to methods to remove dents.

1. was tool that heats the metal and as you run the tool over the dent disappears No repainting needed.
2. was type of puller tool with rubber things comes with a glue which you put on the rubber then stick it to dent then use the puller, the glue is removed with a solvent, again no repainting needed.

Not sure if any of them work work for you though.

[Tonto]

I watched wheeler dealers the other night and they used to methods to remove dents.

1. was tool that heats the metal and as you run the tool over the dent disappears No repainting needed.
2. was type of puller tool with rubber things comes with a glue which you put on the rubber then stick it to dent then use the puller, the glue is removed with a solvent, again no repainting needed.

Not sure if any of them work work for you though.

I watched that too, thought it was a clever way of doing it.


Sent from my iPhone using Tapatalk

[stigeye]

I used a company called Dent-Technique a few years ago to remove about 6 or 7 small dents from our old Peugeot and all were removed without a trace. Cost me about £75 in all but it was well worth it.

http://www.dent-technique.co.uk/