+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Rear bumper inlay (/showthread.php?tid=892)
Rear bumper inlay - Cameron UK - 2:nd-Sep-2014
Can anyone check the part numbers for the rear bumper insert with the exhaust cut out.
I'm wanting part number for facelift and preface lift
Wanting to find out if a pre facelift will fit the facelift
Rear bumper inlay - Rusty2009 - 2:nd-Sep-2014
I think they are the same mate will check tomorrow.
Rear bumper inlay - tucpal - 4:th-Sep-2014
No mate they will not be the same part number they are a bit different also will they fit each other most likely
Rear bumper inlay - Rusty2009 - 4:th-Sep-2014
Looking on EPC they look the same bar the cutout.
Will have to try it and see. I see no reason why it wont though fit.
Rear bumper inlay - tucpal - 4:th-Sep-2014
there is a lip on the new one the old one does not have the lip
Rear bumper inlay - WhelanUK - 4:th-Sep-2014
Not a massive difference then. Think this is so I can fit the exhaust tip. Will see how it looks at Trax. If not will have to cut mine.
Rear bumper inlay - Rusty2009 - 4:th-Sep-2014
It's quite easy to cut mate I've cut mine
It's getting the measurements right measure 3 times cut once.