Switch to desktop version  
How to use the original microphone Navi600 in Android radio - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC Howto's (https://vxoc.org.uk/forum/forumdisplay.php?fid=21)
+---- Forum: Interior How-to's (https://vxoc.org.uk/forum/forumdisplay.php?fid=34)
+---- Thread: How to use the original microphone Navi600 in Android radio (/showthread.php?tid=3568)

How to use the original microphone Navi600 in Android radio - sacaminas - 9:th-Oct-2017

Hello everyone;
First of all, thank you for sharing knowledge about this car. Here I will explain how to connect the original Navi 600 microphone to
the Android radio car
1º Found the original micro.



2º. Check the micro color cables:

In this case one is blue and the other is brown-black.

3º. Goes to the original bt jack under the radio.


4º. Remove the original bt plug and look for the cables in step 2.
They are two pairs of blue and brown-black cables, check with a tester for electrical continuity to identify the correct ones.



5º With a male-male jack cable ,  I cutted in one side and the other  connect to the radio. Now with the cutted side, connect to the
black-brown and blue cables.


Now it's working the original microphone with the android radio.

Regards from Spain

RE: How to use the original microphone Navi600 in Android radio - zzattack - 13:th-Oct-2017

Very nice, much nicer than fitting some cheapy chinese thing that comes with those radios