+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Request for information (https://vxoc.org.uk/forum/forumdisplay.php?fid=24)
+--- Thread: Insignia hubs on an astra (/showthread.php?tid=2927)
Insignia hubs on an astra - D92 - 10:th-Nov-2016
Hi all,
Not sure if its possible, but would the insignia's hub bearing + break disks fit on the astra's hub & driveshafts, and would I also need the caliper's of the insignia as well?
http://www.ebay.co.uk/itm/381178682477 does look like its the same 3 bolt fitment onto the hub.
I ask as alloys I am after are in 5x120, but with PCD adapters would stick too far out the arch.
Cheers
RE: Insignia hubs on an astra - tucpal - 10:th-Nov-2016
That will be alot of work sure the rear hubs may well be a problem as the rear axle is totally different to the astra j and gtc I would say hub adapter will be better
RE: Insignia hubs on an astra - D92 - 11:th-Nov-2016
Thought so :( shame Astra has strange PCD
RE: Insignia hubs on an astra - cornishtaz - 11:th-Nov-2016
Got a similar issue with my K the wheels I really want are 5x115 and the K is 5x105.
Sent from my SM-G930F using Tapatalk
RE: Insignia hubs on an astra - D92 - 11:th-Nov-2016
Surprised the K isn't 5x115 like the J
Why must Vauxhall be so inconsistent
RE: Insignia hubs on an astra - cornishtaz - 11:th-Nov-2016
Tell me about it I've not found a set of 5x105 alloys that really stand out
Sent from my SM-G930F using Tapatalk