Switch to desktop version  
Gear stick ( broke ? ) - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Gear stick ( broke ? ) (/showthread.php?tid=2343)



Gear stick ( broke ? ) - Daz21 - 2:nd-Apr-2016

Hi is this broke it goes into reverse without the lever



RE: Gear stick ( broke ? ) - hejhopp123 - 2:nd-Apr-2016

Does the lever reverse back as usual or do you have to pull it back in resting position?


RE: Gear stick ( broke ? ) - Daz21 - 2:nd-Apr-2016

No all as normal just if I go for 1st it will allow me to go to reverse without lever being pulled up no stop gate of you know what I mean.


RE: Gear stick ( broke ? ) - cornishtaz - 3:rd-Apr-2016

There is no way you can put it in reverse without lifting the lever. Can't see very well on the picture if it's broken or not fitted correctly.


RE: Gear stick ( broke ? ) - Daz21 - 3:rd-Apr-2016

Trust me it goes into reverse with no effort just like going into 1st.


RE: Gear stick ( broke ? ) - hejhopp123 - 3:rd-Apr-2016

Hello there,

Was doing something else with the my car and had you in mind... took a picture from my gear stick mechanism...



Red circle = block you move with the lever on your gear stick
Yellow cicrle = barrier which should prevent you from chose reverse gear

Is it working?


RE: Gear stick ( broke ? ) - tucpal - 3:rd-Apr-2016

have you played about with the two cables at all if so they will need to be reset correctly


RE: Gear stick ( broke ? ) - cornishtaz - 7:th-Apr-2016

@Daz21 where in Wiltshire are you I'm in Swindon and could have a look for you


RE: Gear stick ( broke ? ) - Daz21 - 7:th-Apr-2016

(7:th-Apr-2016, 08:24:45)cornishtaz Wrote: @Daz21 where in Wiltshire are you I'm in Swindon and could have a look for you

hi not far ur just up the road lol i have sorted it now thanks tho


RE: Gear stick ( broke ? ) - nosteb90 - 6:th-Dec-2017

I have the same issue, how did you resolve? Thanks in advance.