|
Headlights - LED - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC Technical (https://vxoc.org.uk/forum/forumdisplay.php?fid=20) +---- Forum: Electrical (https://vxoc.org.uk/forum/forumdisplay.php?fid=30) +---- Thread: Headlights - LED (/showthread.php?tid=2215) |
Headlights - LED - Scarlatty - 24:th-Feb-2016 Hi guys! I have changed my OEM headlights from my Astra J, to OEM LED headlights daylight. However, the car give an daylight error. Can this be resolved by updating/change settings of the software? Best Regards from Portugal! RE: Headlights - LED - bhalay207 - 24:th-Feb-2016 You need to wire in resistors to stop the errors. It's because a led uses less power than a standard bulb Sent from my LG G4 using Tapatalk Like these http://pages.ebay.com/link/?nav=item.view&id=252267858980&alt=web Sent from my LG G4 using Tapatalk RE: Headlights - LED - Scarlatty - 24:th-Feb-2016 (24:th-Feb-2016, 16:27:40)bhalay207 Wrote: You need to wire in resistors to stop the errors. It's because a led uses less power than a standard bulb Thanks! Exist another way to do it without the resisters? by changing the car software settings? RE: Headlights - LED - bhalay207 - 24:th-Feb-2016 Sadly not no. The GTC doesn't have errors but the 5 doors do. I've got LEDs but have to have the resistors fitted. Sent from my LG G4 using Tapatalk Headlights - LED - Rusty2009 - 25:th-Feb-2016 Have you swapped the whole headlight to an LED headlight or have you just swapped bulb? Sent from my iPhone using Tapatalk RE: Headlights - LED - Scarlatty - 26:th-Feb-2016 (25:th-Feb-2016, 17:15:26)Rusty2009 Wrote: Have you swapped the whole headlight to an LED headlight or have you just swapped bulb? The whole headlight, also OEM. RE: Headlights - LED - Rusty2009 - 27:th-Feb-2016 Ok in that case I would advise getting a VCI request sent in to GM asking for the software. They may say no they may allow it. Request the VCI via the BCM. Select no programming possible. What I would put in the comments box is. Custom has fitted LED DRL/ sidelight headlamps due to a accident of ordering the wrong parts. Custom is now getting a warning to check bulbs. Could you please supply a VCI code for the software / calibration files for these headlamps to work error free. Thank-you. |