|
Tail light warning message - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19) +--- Thread: Tail light warning message (/showthread.php?tid=1481) |
Tail light warning message - CHTOPR - 8:th-Apr-2015 Hello everybody. I have changed the rear brake light bulbs to the LED bulbs philips and now every time i have a message that i need to check "stop" bulbs. Is it possible to turn off checking this "stop" bulbs? Thanks in advance and sorry for my poor English. RE: Tail light warning message - Rusty2009 - 8:th-Apr-2015 I take you are asking if you can turn off the bulb checking? If so no you can't, I'm sure you would rather know if a bulb was out rather than have a car hit you from behind? The only way around this would be for you to install a load resistor or but the standard bulbs back in. RE: Tail light warning message - tucpal - 8:th-Apr-2015 as rusty said the rear brake lights are on the canbus no canbus LED will cancel the errors the only way to cancel the errors is to add a load resister between the wires RE: Tail light warning message - CHTOPR - 8:th-Apr-2015 Thanks for your answers, guys. As you have said thre are two ways to solve the problem. One way is to use a load resister and the second way is to use a standard bulb between the wires. I thought that it is possible to disable this function by OPCOM, am I right? RE: Tail light warning message - Rusty2009 - 8:th-Apr-2015 Not as far as I know mate, the Op-com is still limited on the J. |