![]() |
How to use the original microphone Navi600 in Android radio - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC Howto's (https://vxoc.org.uk/forum/forumdisplay.php?fid=21) +---- Forum: Interior How-to's (https://vxoc.org.uk/forum/forumdisplay.php?fid=34) +---- Thread: How to use the original microphone Navi600 in Android radio (/showthread.php?tid=3568) |
How to use the original microphone Navi600 in Android radio - sacaminas - 9:th-Oct-2017 Hello everyone; First of all, thank you for sharing knowledge about this car. Here I will explain how to connect the original Navi 600 microphone to the Android radio car 1º Found the original micro. ![]() 2º. Check the micro color cables: ![]() In this case one is blue and the other is brown-black. 3º. Goes to the original bt jack under the radio. ![]() 4º. Remove the original bt plug and look for the cables in step 2. They are two pairs of blue and brown-black cables, check with a tester for electrical continuity to identify the correct ones. ![]() 5º With a male-male jack cable , I cutted in one side and the other connect to the radio. Now with the cutted side, connect to the black-brown and blue cables. ![]() Now it's working the original microphone with the android radio. Regards from Spain RE: How to use the original microphone Navi600 in Android radio - zzattack - 13:th-Oct-2017 Very nice, much nicer than fitting some cheapy chinese thing that comes with those radios |