+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Tail light warning message (/showthread.php?tid=1481)
Tail light warning message - CHTOPR - 8:th-Apr-2015
Hello everybody.
I have changed the rear brake light bulbs to the LED bulbs philips and now every time i have a message that i need to check "stop" bulbs. Is it possible to turn off checking this "stop" bulbs?
Thanks in advance and sorry for my poor English.
RE: Tail light warning message - Rusty2009 - 8:th-Apr-2015
I take you are asking if you can turn off the bulb checking?
If so no you can't, I'm sure you would rather know if a bulb was out rather than have a car hit you from behind?
The only way around this would be for you to install a load resistor or but the standard bulbs back in.
RE: Tail light warning message - tucpal - 8:th-Apr-2015
as rusty said the rear brake lights are on the canbus no canbus LED will cancel the errors
the only way to cancel the errors is to add a load resister between the wires
RE: Tail light warning message - CHTOPR - 8:th-Apr-2015
Thanks for your answers, guys.
As you have said thre are two ways to solve the problem. One way is to use a load resister and the second way is to use a standard bulb between the wires.
I thought that it is possible to disable this function by OPCOM, am I right?
RE: Tail light warning message - Rusty2009 - 8:th-Apr-2015
Not as far as I know mate, the Op-com is still limited on the J.