VXOC Astra-J/GTC

Full Version: How to use the original microphone Navi600 in Android radio
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello everyone;
First of all, thank you for sharing knowledge about this car. Here I will explain how to connect the original Navi 600 microphone to
the Android radio car
1º Found the original micro.

[Image: micro1.jpg]

2º. Check the micro color cables:
[Image: 1.jpg]
In this case one is blue and the other is brown-black.

3º. Goes to the original bt jack under the radio.
[Image: modulo2.jpg]

4º. Remove the original bt plug and look for the cables in step 2.
They are two pairs of blue and brown-black cables, check with a tester for electrical continuity to identify the correct ones.
[Image: 2.jpg]


5º With a male-male jack cable ,  I cutted in one side and the other  connect to the radio. Now with the cutted side, connect to the
black-brown and blue cables.
[Image: 4.jpg]

Now it's working the original microphone with the android radio.

Regards from Spain
Very nice, much nicer than fitting some cheapy chinese thing that comes with those radios