Tags
some issues with exterior
Hey guys. Got a few problems with bodywork one as you could probably already tell. The black trim under the windows are starting to get blueish coloured dots appearing just noticed after giving her a good wash seeing how the suns been staying out, another issue is tar that is stuck on the passenger side. most of the time WD40 on a cloth gets it off then giving a good wash after but it wont budge. last one that is annoying me the most is stone chips and this bulge like thing thats not tar?? I wil
Some advice
Iv got 1.4 j its fine for what i use it for as family car but just want bit more go can change car as we have a 8month old taking the money lol. Was just wondering would a tuning box give me a bit more umf off the mark as when on the duel carriageway traffic lights it would help
Thanks
Sent from my SM-G935F using Tapatalk
why some astra j cars are more noisy than the others
Did you know that some astras are more noisy(inside the cabinet).Because opel/wauxhall cancelled some rubber parts to save money in some models.
The guy on the following video says: I have 2013 model astra j (black colour)and it has a special rubber sealing to prevent outside noise.My friend's car is 2015 model(silver one) and it has no same rubber sealing.Therefore my car is more silent than my friend's car.
I have also 2015 model astra j and I have also noise problem(If the driver door
Author:
fezza37 - Replies:
4 - Views: 7730
My Stop start hasn't worked for some time
Hi,
My Stop start hasn't worked for some time, it will occasionally work once after a long run.
Will charging the battery help?
Is this charger OK for a 2012 2.0 CDTI start stop battery?
Batteries - Black/Yellow
Thanks
Astra won't start after some sensor cleaning?
Hey vxoc !
My car wont start anymore after i cleaned the EGR and suction control valve (scv) and the MAP sensor. the last thing that happened was whistle turbo sound from the engine and it went to ''reduced power mode'' when i sae that i parked the car it i dint turn on since.. but before all that i was haveing with power and stalling issues for the last month and after some internet research i begend to clean the sensors.
here are the error codes i got from opcom hopefully someone can he