[align=center]How To Remove rear bumper Reflectors

[Image: https://www.vxoc.org.uk/Images/rusty/How...tors/1.JPG]

The best way to do this is to stick you hand up behind the bumper and feel for the two push tabs, as shown in the below pic.

[Image: https://www.vxoc.org.uk/Images/rusty/How...tors/4.JPG]

Once you have found them push one in at a time and push it forward (towards t

hey all

ive not even collected my gtc yet and already ive got a few things i would like to change kind of sharpish
ive got a gtc sri in white on a 12 plate but unfortunately it dose not have the rear led tail lights nore the newer looking headlights with the
more modern day time running lights which ive seen on some gtcs i think it maybe a added extra possibly ?

im not sure if its possible just to get the headlights and rear lights from vauxhall and fit them or if theres some sort of

Has anyone done this and does anyone have the link to the new sticky bits needed

Also does the griffin come away from the background

Can anyone check the part numbers for the rear bumper insert with the exhaust cut out.

I'm wanting part number for facelift and preface lift

Wanting to find out if a pre facelift will fit the facelift

Do people think this is possible or will it require painting want to make mine gloss black

I'm going to retrofit the rear seat belt buckle with sensors,

I've ordered both the buckles cost £29.00 posted as opposed to £110+.

I have the wiring diagram just can't seem to locate the terminals for it so if anyone can help that would be good, even if you know what other Vauxhall car it's fitted and where it is I can go up the scrappy and get one.

[Image: http://vxoc.org.uk/Images/rusty/K36.bmp]

Connector Part Information
Harness Type: Body
OEM Connector: 19151247
Service Connector: 1

Just been looking at the lights and it looks as though the fog light and reversing light only have a clear or red bit of plastic stuck behind the lens cover looks inter changeable.

Anybody else look at it and see what they think?

No need to remove the lights.


Sent from my iPhone 5c using Tapatalk.

[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

How-to rear 12v socket.

The first thing you want to check is the fuse board behind the glove box for fuse 6

[Image: https://www.vxoc.org.uk/Images/rusty/Rea...cket/1.JPG]

If you have fuse 6 the remove the fuse board (just pinch the two tabs at the top and pull towards you.

You need to look for Pin 24 and 30 I could only get a pic of 24 but 30 i

I'm looking for someone with smoked rear lights, the inner LH side (boot) that also has the reverse lens tinted.

If anybody has this would they be willing to swap for a smoked with clear lens?

I would pay postage and more than happy to send mine first so you are not without a car.

This is what I'm after but LH one,
[Image: http://tapatalk.imageshack.com/v2/14/12/...ce9abf.jpg]

Sent from my iPhone 5c using Tapatalk.

[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

How-to LED rear reflectors.

You will need the following items.

1. A pair of reflectors.
2. A Stanley knife with some Sharpe blades.
3. Plastex (CLEAR) you can buy it here http://www.repairproducts.co.uk/page20.htm
4. A pair of RED LED strips [url=http://www.ebay.co.uk/itm/171505511260?_trksid=p2059210.m2749.l2649&var=470532550287&ssP