[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

How-to Remove Sun visors

The first thing you need to do is to remove the cover plate then undo 3 screws.

[Image: https://www.vxoc.org.uk/Images/rusty/pos...sors/1.JPG]

[Image: http://www.vxoc.org.uk/Images/rusty/post...sors/2.JPG]

[img]http://www.vxoc.org.uk/Images/rusty/post%20images/How-to%20Sun%20visors/3.J

[align=center][Image: http://i179.photobucket.com/albums/w301/...5fce57.jpg]

This How to will Stop Rattles that Appear to be Coming from the Seat Belt or A Pillar Area.

For a while now i have a Wired Rattle that seems to come from the Passenger Side Area
Around the Seat Belt or A Pillar Area and i have not been Able to Put my Finger on were Exactly it has been Coming From

[img]http://i179.photobucket.com/albums/w301/tucpal/trim%20sp%20006_zpsbagsk

[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

How-to Remove Door Trim.

[Image: https://www.vxoc.org.uk/Images/rusty/How...trim/1.JPG]

So first start by getting a trim tool and go about half way along the bottom.

[Image: https://www.vxoc.org.uk/Images/rusty/How...trim/2.JPG]

Then work to left abit then to the right just use a twist method on the trim tool (be careful on the rig

This is the 'How to' guide showing you how to change your diesel fuel filter. My 'J' Astra is the 2010 1.7cdti and as far as I know, the filter is the same size and location for the 1.3, 1.7 and 2.0 models.

Firstly, always buy a branded filter such as Fram or Mann. I bought the Mann filter from Euro car parts which included two new seals which you will need and it cost me £18.30.

Job time - Estimated 30-45 mins

You will need the following tools:

Jack (I used my trolley jack and axle stands

[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

How-to remove fog surround Facelift

Tools needed
1x trim tool
1x cross head screw driver.

[Image: https://www.vxoc.org.uk/Images/rusty/How...lift/1.JPG]

Ok so the first thing we need to do is pop the two covers off that are hiding the screws.

[img]https://www.vxoc.org.uk/Images/rusty/How-to%20remove%20fog%20surround%20

This little gadget seems too obvious for me to post it online and technically it isn't a 'how to' guide. However, I'm sure there are drivers on this forum who may just have overlooked this idea so I'm posting it in case it helps someone.

Instead of having your TomTom stuck on the windscreen in your face, there is a 'gooseneck' available, some made my TomTom themselves and others that are after market. Mine is an after market one and may do the job better because as far as I know it is slightl

[align=center][Image: http://www.vxoc.org.uk/Images/vxoc%20ast...x.o.c.jpeg]

How-to Extra Boot light.

Ok so first of all you need to feel along the top of the side trim, you will fell there is plastic behind it but as you move along you will feel there is a bit you can push in.

[Image: https://www.vxoc.org.uk/Images/rusty/How...ight/1.JPG]

Once you found that area you can start to cut (DO NOT CUT IT ALL WAY) do a

[align=center]I used E-tech alloy wheel kit, [url=http://www.ebay.co.uk/itm/E-TECH-Silver-Alloy-Wheel-Paint-With-Lacque

Hey All

This is just a quick how to for removing the black trim which is inside the boot door (the bit which has the grab handles for closing the boot from the inside). 

So to begin with there are 2 x 7MM bolts which hold the lid firmly in place to the frame of the boot itself, you want to remove these first. There are located within the internal grab handles (one on each side).

[color=#ff3333]Photo is of the hole where one of the bolts was removed from (will get a better photo soon). Ther

[align=center][Image: http://i179.photobucket.com/albums/w301/...5fce57.jpg]

Here is my tutorial on installing a set of rear aftermarket parking sensors. You’ll want to start off by following my tutorial below to remove the black interior boot trim before you do anything else. Once this has been done then you can start with the installation an